Panasonic VB42050 VB42050 User Guide - Page 104
Call Park
View all Panasonic VB42050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Key Telephone Features Call Park • If the Automatic Outside Line Hold feature is programmed for your system, pressing any other line key will place your original call on System Hold. • A held call will recall if it is not retrieved before the Hold Recall Timer expires. "Hold Recall #XX" (where "XX" is the outside line number) appears on the display if a call has been held beyond the time limit. • If you press the HOLD key during a conference with two outside lines, both outside lines will be placed on hold. • If your system is set to onhook transfer and you have placed an outside call on hold, and you then make an Intercom Call, make sure the other extension presses the FLASH key or hangs up before you do. If you hang up before the other extension, the held outside line will be transferred to that extension. • If there is no response to the Hold Recall, the tone is issued at the Attendant Phone (extension 100 or 10). However, no tone is issued at the Attendant Phone if Night Mode is activated or if the call is on a Private Line. • An error tone is issued if you attempt to place more than one intercom call on hold at the same time. • The DBS 824 can provide Music-on-Hold to callers placed on hold. See "Music-On-Hold" (page 1-24) for more information. Call Park (CPC-S and CPC-M) Description You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient of the call. Simply park the call, and then page the person you want to transfer to. That person can answer the call from any extension by dialing the number of the extension that parked the call. Operation To park a call: 1. Press the HOLD key. Revised April 2000 DBS 824-3.0/3.2-700 3-17