Panasonic VB42050 VB42050 User Guide - Page 132
Revised April 2000, DBS 824-3.0/3.2-700
![]() |
View all Panasonic VB42050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Key Telephone Features Intercom Calling "Talk-EXT XXX" (where "XXX" is the extension) appears on the display. 4. Replace the handset. To make an Tone Call: 1. Pick up the handset. The phone issues intercom dial tone. Note: If you are calling from an extension programmed for prime line preference, press the FF key programmed for intercom operation. 2. Dial the extension number. 3. If the system default is voice calling, dial "1." • "Call-EXT XXX" (where "XXX" is the extension) appears on the display. If the extension name has been stored, that name appears, rather than the extension number. • The called extension rings and the EXT LED flashes. • When the call is answered, Talk-EXT XXX" (where "XXX" is the extension) appears on the display. If the extension name has been stored, that name appears on the display after "Talk" instead of "-EXT XXX." 4. Complete the call and replace the handset. The EXT LED goes off. To transfer a call using Tone Calling: 1. Press the HOLD key. • The EXT LED flashes. • "Hold-EXT XXX" (where "XXX" is the extension) appears on the display. 2. Dial the number of the extension to which the call will be transferred. 3. If the system default is voice calling, dial "1." "Call-EXT XXX" (where "XXX" is the extension) appears on the display. Revised April 2000 DBS 824-3.0/3.2-700 3-45
![](/manual_guide/products/panasonic-vb42050-vb42050-user-guide-16edb5a/132.png)