Panasonic VB42050 VB42050 User Guide - Page 222

SLT Features Call Waiting Call Waiting (CPC-S and CPC-M) Description You can send a Call Waiting signal, followed by a brief LCD message, to a busy extension. The party receiving the message need only replace the handset and then pick it up again to be automatically connected to your extension. The following messages can be sent using the Call Waiting feature: Table 5-4. Call Waiting Text Messages Message Code 5 6 7 9 Message "Visitor Here" "Need Help" "Important" "Emergency" Message codes 0-4 are not available. Operation To Set Call Waiting: 1. Lift the handset. 2. Dial the extension number. 3. Upon hearing busy tone, press "3." 4. If you wish to send a text message, dial the desired message code (5-7 or 9). The message displays on the called party's phone if the called party has a key phone. (If the called party does not have a display, the extension continues to issue a call waiting tone.) 5. Remain on the line until the called party picks up. Revised April 2000 DBS 824-3.0/3.2-700 5-17