Panasonic VB42050 VB42050 User Guide - Page 194
Intercom Calling
View all Panasonic VB42050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
DSLT Features Intercom Calling differently, depending on whether they are trunk or intercom calls. Intercom calls receive busy tone; trunk calls are routed to the extension defined in permanent call forwarding. The following types of incoming trunk calls will follow permanent call forward settings: - Direct trunk calls - Transferred trunk calls. • The DND feature cannot be activated at an extension selected to receive Call Forwarding. Intercom Calling (CPC-S and CPC-M) Descriptions The DBS 824 provides two methods of intercom calling: voice calling and tone calling. Voice Calling. With voice calling, intercom calls are connected immediately, without a ringing tone. Tone Calling. With tone calls, a ringing tone is sent to the called extension. System programming determines whether the DBS 824 uses voice or tone calling as a default. If voice calling is the default, dialing a "1" after the extension number will change the call to a tone call. If tone calling is the default, dialing a "1" will result in a voice call. Operation To make a Voice Call: 1. Lift the handset. 2. Dial the extension number. 3. If the system default is tone calling, dial a "1." Revised April 2000 DBS 824-3.0/3.2-700 4-23