Panasonic VB42050 VB42050 User Guide - Page 165
System Speed Dial
View all Panasonic VB42050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Speed Dialing Key Telephone Features Considerations • Personal Speed Dial numbers can contain up to sixteen characters, including the "*," "#," FLASH (indicate "-"), PAUSE (REDIAL), CONF, and AUTO keys. • A dash ("-") can be displayed in the Personal Speed Dialing number. To display a dash, press the FLASH key where you want the dash to appear. • If you make a mistake while programming, an alarm tone is issued and "ERROR" appears on the display. If this happens, start again from step 1. • Storing a new number erases any previously stored data. • Names for Personal Speed Dialing can be programmed using a DSS console at the Attendant Phone. • If the called party's number and name are stored in the Personal Speed Dial code, that information appears on the display when you use the speed dial code. • Speed Dial numbers cannot be checked while Station Lockout is activated. System Speed Dial (CPC-S and CPC-M) Description Frequently called numbers can be stored using the System Speed Dial feature. System Speed Dial numbers are programmed from the Attendant Phone and can be used by any extension. With the CPC-S and the CPC-M set in the standard mode, up to 90 System Speed Dial Numbers can be stored (00-89). With the CPC-M set in the add-on mode, up to 200 System Speed Dial Numbers can be stored (000-199). Operation To use a programmed System Speed Dial key: 1. Press an unlit line key. • The phone issues outside dial tone. • The line LED lights green. 3-78 DBS 824-3.0/3.2-700 Revised April 2000