Ricoh 3045 Fax Reference - Page 51

Specifying a Destination Entering an IP-Fax Destination C Enter the IP-Fax destination, and then press [OK]. When using IP-Fax transmission, specify the IP-Fax destination (IP address, host name, or alias telephone number) in place of the fax number. See p.77 "Internet Fax Functions (by Specifying an IP Address)". Note ❒ You can enter up to 128 characters. A Press to switch the destination to IP-Fax destination. Note ❒ If you have set both of "Enable H.323" and "Enable SIP" pa- rameters to "On" with "IP-Fax Settings" under "Facsimile Features", [Protocol] appears. Press 2 this button to select a protocol to be used. ❒ If you enter an incorrect character, press [Backspace] or [Delete All]. Then, re-enter the characters correctly. ❒ To change the IP-Fax destination after pressing [OK], press [Edit Dest.], re-enter an IP-Fax destination, and then press [OK]. B Press [Manual Input]. Reference "Entering Text", General Settings Guide The destination is specified. Note ❒ Depending on security settings, [Manual Input] may not appear, and you may be unable to enter the IP-Fax destination. Note ❒ Press [ProgDest] in this order to store the entered IP-Fax destination in the Address Book. See p.45 "Registering Entered Destinations to the Address Book". 43