Sony DSR 250 Operating Instructions - Page 117
To change the label you have made, To erase a character, To enter a space
UPC - 027242579514
View all Sony DSR 250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Labeling a cassette To change the label you have made Insert the cassette to change the label, and operate in the same way as you do to make a new label. If you set the REC/SAVE switch of the cassette to SAVE You cannot label the tape. Slide the REC/SAVE switch to REC. If you have superimposed titles in the cassette When the label is displayed, up to four titles also appear. When the "-----" indicator has fewer than 10 spaces The cassette memory is full. The "-----" indicates the number of characters you can select for the label. To erase a character Turn the SEL/PUSH EXEC dial to select [C], then press the dial. The last character is erased. To enter a space Select [ ], then select the blank part. Editing 117
Editing
117
Labeling a cassette
To change the label you have made
Insert the cassette to change the label, and operate in the same way as you do to make a
new label.
If you set the REC/SAVE switch of the cassette to SAVE
You cannot label the tape. Slide the REC/SAVE switch to REC.
If you have superimposed titles in the cassette
When the label is displayed, up to four titles also appear.
When the
“
-----
”
indicator has fewer than 10 spaces
The cassette memory is full.
The
“
-----
”
indicates the number of characters you can select for the label.
To erase a character
Turn the SEL/PUSH EXEC dial to select [
C
], then press the dial. The last character is
erased.
To enter a space
Select [
], then select the blank part.