Sony DSR 250 Operating Instructions - Page 137

Recording an image from a tape as a still image Your camcorder can read moving picture data recorded on a tape and record it as a still image on a "Memory Stick." Your camcorder can also take in moving picture data through the input connector and record it as a still image on a "Memory Stick." Before operation Insert a recorded tape and a "Memory Stick" into your camcorder. (1) Set the MEMORY/CAMERA/VTR selector to VTR. (2) Press N. The picture recorded on the tape is played back. (3) Keep pressing PHOTO lightly until the picture from the tape freezes. "CAPTURE" appears on the LCD screen or in the viewfinder. Recording does not start yet. (4) Press PHOTO deeper. The image displayed on the screen will be recorded on a "Memory Stick." Recording is complete when the bar scroll indicator disappears. 1 MEMORY CAMERA 2 REW PLAY FF VTR 3 PHOTO CAPTURE 4 PHOTO "Memory Stick" Operations When the access lamp is lit or is flashing Never shake or strike the unit. Also, do not turn the power off , eject a "Memory Stick" or remove the battery pack. Otherwise, image data breakdown may occur. If " " appears on the LCD screen or in the viewfinder The inserted "Memory Stick" is incompatible with your camcorder because its format does not conform to that of your camcorder. Check the format of the "Memory Stick." If you press PHOTO lightly in the playback mode The playback pauses momentarily. Sound recorded on a tape You cannot record the sound from a tape. When the auto logo insert function is activated You cannot use this function. Refer to the extra operating instructions, "Auto Logo Insert for Copyright Protection." 137