Sony DSR 250 Operating Instructions - Page 94
Using with an analog video unit and a PC, Signal convert function
UPC - 027242579514
View all Sony DSR 250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Using with an analog video unit and a PC - Signal convert function You can convert the analog input signal to the digital signal and output it from the DV IN/OUT connector on this camcorder. You can capture images and sound from an analog video unit connecting a PC which has the i.LINK connector to your camcorder. S VIDEO (not supplied) DV IN/OUT (not supplied) OUT S VIDEO VIDEO AUDIO DV connecting cable (i.LINK cable) (not supplied) : Signal flow (1) Set the MEMORY/CAMERA/VTR selector to VTR. (2) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu. (3) Turn the SEL/PUSH EXEC dial to select , then press the dial. (4) Turn the SEL/PUSH EXEC dial to select A/V t DV OUT, then press the dial. (5) Turn the SEL/PUSH EXEC dial to select ON, then press the dial. (6) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to erase the menu display. (7) Start playback on the analog video unit slightly ahead of the point from which you want to start capturing images. (8) Start capturing procedures on your PC. The operation procedures depend on your PC and the software which you use. For details on how to capture images, refer to the instruction manual of your PC and your software. After capturing images and sound Stop capturing procedures on your PC, and stop the playback on the analog video unit. 94