Sony DSR 250 Operating Instructions - Page 56
Connecting an optional external, microphone
UPC - 027242579514
View all Sony DSR 250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Connecting an optional external microphone You can also use an external 48-V microphone by connecting it to the MIC IN +48V connector. (The optional CAC-12 Microphone Holder is required.) Installing the optional CAC-12 Microphone Holder Remove the two retaining screws (M3 × 12) for the optional microphone holder, then use these screws to attach the CAC-12 Microphone Holder. CAC-12 Screws removed from the camcorder Fitting an optional microphone Use the following procedure to attach an optional ECM-670 Microphone. (1) Loosen the screw of the CAC-12 Microphone Holder, then open the holder and replace the microphone adaptor with the one supplied with the ECM-670 Microphone. (2) Insert the microphone in the microphone holder, close the holder, and tighten the screw. Connect the microphone cable to the MIC IN +48 V connector. 1 2 Microphone adaptor MIC IN +48 V connector Mark 56