Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f
Sony PDWF75 Manual
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony PDWF75 manual content summary:
- Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 1
it for future reference. The supplied CD-ROM includes operating instructions of the PDW-F75 professional disc recorder (English, Japanese, French, German, Italian, Spanish and Chinese versions) in PDF format. For more details, see "Using the CD-ROM Manual" on page 14. PDW-F75 © 2007 Sony Corporation - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 2
by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. • - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 3
operation area. When the unit is installed on the desk or the like, leave at least 5 cm of space in the left and right sides. This Professional Disc Recorder not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 4
approved in this manual could void your authority to operate this equipment. All interface cables used to connect peripherals must Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 5
curité des produits est Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne. Pour toute question concernant le service ou la garantie, veuillez . Um einen elektrischen Schlag zu vermeiden, darf das Gehäuse nicht geöffnet werden. Überlassen Sie Wartungsarbeiten stets nur - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 6
Verbrauchte Batterien entsprechend den Anweisungen des Herstellers entsorgen. Für Kunden in Deutschland Entsorgungshinweis: Bitte werfen Sie nur entladene Batterien in die Sammelboxen beim Handel oder den Kommunen. Entladen sind Batterien in der Regel dann, wenn das Gerät abschaltet und signalisiert - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 7
the PDBK-101/102/103/104 Option Boards 13 Using the CD-ROM Manual 14 Preparations 14 Reading the CD-ROM Manual 14 Names and Functions of Parts 15 Front or 2-3 Pulldown 37 Input and Output Signals in 24P (23.98P) Mode 38 Recording in 24P (23.98P) Mode 38 Playback in 24P (23.98P) 2-3 Pulldown - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 8
Clips Selected in the Thumbnail Screen in the Clip List .... 67 Quick Scene Selection (Adding Sub Clips during Recording, Playback, or Search 70 Editing Clip Lists 72 Basic Operations 72 Reordering Sub Clips 72 Modifying the In and Out Points of Sub Clips (Trimming 73 Deleting Sub Clips - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 9
in File Access Mode (for Windows 83 Making FAM Connections 83 Operating on Files 84 File Operations in File Access Mode (for Macintosh 85 Making FAM Connections 85 Operating on Files 86 Exiting File Operations 86 Recording Continuous Timecode over FAM Connections ........ 87 Chapter 6 Menus - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 10
112 Using the PDBK-103 Analog HD Input Board 113 Camcorder Connection Example 113 Using the PDBK-104 SD Input Upconverter Board 113 Disc Recorder Connection Example 113 Important Notes on Operation 114 Condensation 114 Periodic Maintenance 115 Digital Hours Meter 115 Troubleshooting 116 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 11
Features The PDW-F75 is a professional disc recorder supporting HD playback and recording with Professional Disc 1) media. When you use this unit in used as a player for video editing and program output, and as a recorder for nonlinear editing. For these applications, it can be connected to Sony - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 12
function, with the ability to upconvert to HD and output HDSDI signals when playing back DVCAM discs. i.LINK (DV) output is also supported 1), allowing you to use nonlinear editors in a standard i.LINK (DV) environment. 1) Input (recording) is not supported. Recording of proxy AV data Proxy AV data - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 13
XDCAM allows you to record and use the menu service representative for more information about purchasing and installing option boards. • Up to two option boards may be installed. Some combinations are not supported HD compatible files for recording by this unit. 1) HDV and are trademarks of Sony - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 14
Overview Using the CD-ROM Manual The supplied CD-ROM includes versions of the Operating Instructions for this unit in English, Japanese, French, German, Italian, Spanish, and Chinese in PDF format. Preparations The following program must be installed on your computer in order to read the Operating - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 15
JOG SHUTTLE EJECT 4 Shuttle/jog/ variable-speed playback control block 5 Recording/playback control block a On/standby 1 switch and indicator When the using the unit, normally leave the rear panel POWER switch in the * (on) position, and use this switch to switch the unit between the operating - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 16
pressed together with the SHIFT button. g MENU button Use this for system menu operations. The system menu appears in the display when this selection screen appears. To play back the clips in the order they were recorded, press this button again, turning it off. The clip list selection screen - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 17
Audio level meters qa Audio format qs Recording/playback format qd Time data type qf Time 30 -40 -40 -60 1 2 -60 3 4 4CH 16 BIT 3+4 MPEG HD SP 1080 60I INPUT VITC 001/034 REM:077M 00 : 00 .00 : 00 : Each press of this button turns key operation inhibit mode on or off. d PAGE button - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 18
screen. Note Use the largest size to view superimposed information. f Function menu Use the PAGE Recording format of the loaded disc. During recording/E-E screen display/FAM connection: Signal format MPEG HD DVCAM Compression method (video bit rate) a) HQ SP LP - a) Selected with OPERATIONAL - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 19
button < button: IN button , button: OUT button You can use these buttons for menu setting operations, thumbnail selection, setting or deleting In/Out points, and so on if an attempt is made to set an In point after a recorded Out point. OUT indicator: This lights when an Out point exists. It - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 20
speed varies in the range ±20 times normal speed (using MPEG HD/DVCAM), according to the angular position of the shuttle dial OPERATIONAL FUNCTION >SEARCH ENABLE in the setup menu is set to "DIAL DIRECT" (see page 95), return the shuttle dial to the center position after using it. 5 Recording - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 21
of OPERATIONAL FUNCTION >FIND MODE determines whether the unit jumps to clips or to REC START essence marks. When you play back clips recorded with COMPOSITE OUTPUT AUDIO MONITOR R L TIME CODE IN OUT -AC IN ANALOG HD INPUT Y/G PB /R AUDIO INPUT 1/3 2/4 AUDIO OUTPUT 1/3 2/4 DIGITAL - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 22
page P1 of the function menu is set to "ON", and DISPLAY CONTROL >HD CHARA in the setup menu is set to "ALL", information such as timecode, (XLR 3-pin, female) These connectors input two channels of analog audio. You can use the A1 INPUT to A4 INPUT items on the HOME page of the function menu (see - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 23
menu is set to "ON", and DISPLAY CONTROL >HD CHARA in the setup menu is set to "ALL" channels 3 and 4. To handle input signals as non-audio data, use the AUDIO CONTROL >DATA MODE item of the setup menu (see page the operating state of the unit. During playback: Playback timecode During recording: - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 24
this unit from that device. When you use this connector, set the remote connector selector recording operation and creates a new clip. c REMOTE(9P) (remote control 9-pin) connector (D-sub 9-pin, RS-422A compliant, female) To control this unit from a controller or VTR supporting the RS-422A Sony - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 25
mark. 1) STOP key: Press this to stop recording or playback. 1) The setting of OPERATIONAL FUNCTION >FIND MODE determines whether the unit jumps the lithium battery in the remote commander The remote commander uses a CR2025 Lithium Battery. Do not use a battery other than the CR2025. 1 Hold down the - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 26
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. ATTENTION Danger d'explosion si la batterie n' button presses may not operate. The average lithium battery lifetime is about one year, but this depends on the pattern of use. If pressing the - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 27
Therefore, you need to set the system frequency before using the unit. (The unit cannot be used unless the system frequency is set.) Once it is -20 -30 -30 -40 -40 -60 1 2 -60 3 4 4CH 16 BIT 3+4 MPEG HD SP 1080 60I VITC COOO1 REM:077M 00: 00 .00: 00 TCG EXT TC MODE PRESET RUN MODE - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 28
a Sony multi-format LCD monitor. You can also superimpose character information such as timecode and the unit's operating status on output video. For details, see "Superimposed Text Information" (page 40). To view HD video Connect an HD video monitor using method 1 or 2 in the following figure - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 29
COMPOSITE OUTPUT AUDIO MONITOR PDW-F75 (this unit) REF VIDEO INPUT COMPOSITE OUTPUT AUDIO MONITOR R L TIME CODE IN OUT -AC IN ANALOG HD INPUT Y/G PB /R mode). Notes • The required FAM driver is installed when you install the PDZ-1 software. • Use version 2.01 or higher of the FAM - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 30
using PDZ-1. Some limitations apply to FAM connections. For details, see "File Operations in File Access Mode (for Windows)" in Chapter 5 (page 83). PDW-F75 in DVCAM format. Data recorded in MPEG HD format is output after On the computer Install editing software supporting the DVCAM format. On this - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 31
manuals provided with the equipment to be connected. See page 34 for more information about editing control unit settings. When using an editing control unit The following figure shows a cut editing system comprising this unit as a player, an HDW-M2000/M2000P HD video monitor unit as a recorder - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 32
/ M2000P, refer to the operation manual for the unit. When using the editing functions of the recorder (connections using the REMOTE (9P) connector) AUDIO MONITOR PDW-F75 (this unit, player) REF VIDEO INPUT COMPOSITE OUTPUT AUDIO MONITOR R L TIME CODE IN OUT -AC IN ANALOG HD INPUT Y/G - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 33
/ M2000P, refer to the operation manual for that unit. When using the editing functions of the recorder (connections using the S400 connector) The following PDW-F75 (this unit, player) OUTPUT MONITOR REF VIDEO INPUT COMPOSITE OUTPUT AUDIO MONITOR R L TIME CODE IN OUT -AC IN ANALOG HD - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 34
When connecting an editing control unit to use with this unit, make the following CONTROL Setup menu item 19 FNC MODE: XDCAM Settings on this unit Setup menu item to REF VIDEO input b) Recording: Synchronize to HDSDI input operations by FAM connection (see page 83). 34 External Synchronization - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 35
(page 88) for more information about menu operations and menu items. Setting the Date and Time When using this unit for the first time, you should 20 -30 -30 -40 -40 -60 1 2 -60 3 4 4CH 16 BIT 3+4 MPEG HD SP 1080 60I VITC COOO1 REM:077M 00: 00 .00: 00 TCG EXT TC MODE PRESET RUN - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 36
-30 -30 -40 -40 -60 1 2 -60 3 4 4CH 16 BIT 3+4 MPEG HD SP 1080 60I VITC COOO1 REM:077M 00: 00 .00: 00 TCG EXT TC MODE PRESET RUN menu appears on the monitor screen (see page 91). 3 Select DISPLAY CONTROL using the M/MARK1 button or m/MARK2 button, then press the ,/OUT button. The - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 37
UC/J : J 23.9P OUTPUT: PsF 8 Press the M/MARK1 or m/MARK2 button to select "SYSTEM FREQ". 9 Press the ,/OUT button. Setting values appear. SETUP MENU OPERATIONAL FUNCTION SYSTEM SEL SYSTEM FREQ : 601 * 60I 50I 30P 25P 23.98P 10Press the m/MARK2 button to select "23.98P". 11If you want to change - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 38
signals after pulldown conversion For more information about remote timecode mode, refer to the REMOTE (9-pin) Protocol Manual for the PDW series (not supplied). Recording in 24P (23.98P) Mode Recording frame sequence and clip length See the following figure for the frame sequence. In 24P (23.98P - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 39
recorded clips is a multiple of 4, set the run mode to "REC RUN", and record after manually >PD PRESET in the setup menu are used as the conversion references. To display 30-frame ". SETUP MENU OPERATIONAL FUNCTION DISPLAY CONTROL TIME CODE HD CHARA :ALL 39 24P (23.98P) Mode Settings - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 40
to "ON", the settings of the setup menu items DISPLAY CONTROL >HD CHARA and DISPLAY CONTROL >SD CHARA (see page 97) determine whether superimposed Off COMPOSITE OUTPUT Off On On Off Adjusting the text display You can use the items in the DISPLAY CONTROL setup menu to specify the position, size - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 41
(see page 96) in the setup menu to change the information shown in the second line. See page 105 "Setup Menu Operations" in Chapter 6 for more information about how to use the setup menu. a Type of time data Display Meaning CNT Counter data TCR TC reader timecode data UBR TC reader user - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 42
STILL SHUTTLE (Speed) VAR (Speed) TOP 0001/xxxx END xxxx/xxxx PREROLL C.REC C.REC LOCK C.REC-PAUSE Operation mode Playback mode (servo locked) Record mode (servo unlocked) Record mode (servo locked) A still picture in jog mode Jog mode in forward direction Jog mode in reverse direction - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 43
(capacity 50.0 GB) 1) Professional Disc is a trademark of Sony Corporation. Notes • It is not possible to use the following discs for recording or playback: - Blu-ray Disc - Professional Disc for Data • PFD50DLA discs can be used only by XDCAM devices with the DL mark (see the following illustration - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 44
direction of the arrow Write Inhibit tab settings SAVE SAVE Recording enabled Recording disabled You can also write protect individual clips. For . 3 Select "DISC MENU" using the M/MARK1 button or m/MARK2 button, then press the ,/OUT button. 4 Select "FORMAT" using the m/MARK2 button, then press - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 45
is set to "ON", set it to "OFF" (see page 89). • This operation cannot be cancelled once it begins. • Before using another XDCAM device 1) to perform a full salvage of a disc that was recorded successfully on the PDW-F75/75MD/F355/F335, check that the version of the other device is version 1.7 or - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 46
setup menu item INTERFACE SELECT >REMOTE I/F ("REMOTE" and the connector used appear on the display). To set the video and audio recording formats To set the video recording format Set the video bit rate (compression method) by setting OPERATIONAL FUNCTION >REC FORMAT in the setup menu to one of - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 47
button. The system menu appears on the display. 4 Select "TC PRESET" using the M/MARK1 button or m/MARK2 button, then press the ,/OUT button. The the current time matches the displayed timecode. To set user bits You can record up to eight hexadecimal digits of information (date, time, clip number, - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 48
page P2 of the function menu is ignored. New timecode is recorded in the drop-frame mode of the last recorded timecode on the disc. To record with the internal timecode generator synchronized to external timecode (External Regen) Use this method to synchronize the timecode generators of a number of - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 49
recorded is 2 seconds long. Even if recording start and stop operations are performed within 2 seconds, a 2-second clip is recorded. To adjust the audio recording levels When carrying out audio recording Input level of channel 2 Manually adjusting the audio recording levels Set the VARIABLE switch - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 50
the HDSDI Remote Control Function This section explains the settings required for recording in HDSDI remote control mode, and how the unit operates in this mode. Note The unit (camcorder) that controls this unit must also support HDSDI remote output. Settings Set INTERFACE SELECT >REMOTE I/F in the - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 51
("REMOTE" and the connector used appear on the display). Disc playback start position Although this unit uses optical discs, it is OPERATIONAL FUNCTION >FIND MODE determines whether the unit jumps to clips or to REC START essence marks. When you play back clips recorded XDCAM player. 51 Playback - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 52
recorded sections on the disc is not the same as the recording settings of this unit. In this case, the playback position can be saved to the disc. Playback Operation display. To carry out playback again, move back to the desired clip using the PREV button, jog dial or shuttle dial. To set shot marks - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 53
Recording and Playback Normally, the unit enters jog mode as soon as you turn the jog dial. If you want it to enter jog mode only when you press the JOG button, set OPERATIONAL thumbnail images (index pictures) of all clips on the disc, and use them to cue up a desired clip. To display a list of - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 54
first frame of the clip is used as the thumbnail but you can change this setting so that any desired frame is used as the clip thumbnail (see . DATE: Date and time of recording TIME CODE: Timecode of the first frame in the clip DURATION: Recording time SEQUENCE NUMBER: Thumbnail sequence number - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 55
You can repeat the expand operation up to three times (t 12 blocks t 144 blocks t 1,728 blocks). 6 Press the PLAY button or use the jog or shuttle dial to Note The maximum number of blocks may be larger than 1,728 when the recorded duration of the clip is short. In this case, the frame interval of - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 56
for Frames with Essence Marks Proceed as follows. 13 Essence marks not recorded on the disc are displayed in gray. To return to the thumbnail thumbnail whose frame you want to cue up (you can do this with the same operations as step 1 of "To select a thumbnail image and start playback" (see page - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 57
Recording and whose frame you want to cue up (you can do this with the same operations as step 1 of "To select a thumbnail image and start playback" (see sub clip in the current clip list. Notes • Stop the unit before using the SUB CLIP button. Press the STOP button if a message appears telling - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 58
, initial timecode, playback time) Currently selected sub clip Recording date and time of clip list Total playback time of Manual for the PDW series (not supplied). To stop repeat playback Do one of the following. • Set OPERATIONAL FUNCTION >REPEAT MODE in the setup menu to "OFF". • Operate - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 59
Recording and Playback Locking (Write-Protecting) Clips In the thumbnail screen, you can lock them so that they cannot be deleted or altered. Locking prevents the following operations shortcut operation). To lock all clips 1 Carry out steps 1 and 3 of "Locking Clips" to display the CLIP MENU. 2 Use - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 60
Write Inhibit tab of the disc is set to the recording disabled position, or when "REC INH" on page clip to delete. (You can do this with the same operations as step 1 of "To select a thumbnail image and start button. Press the RESET or MENU button. 5 Use the V/MARK1 button to select "OK", and then - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 61
3 Recording and Playback Assigning Sequence Numbers to Thumbnails You can assign sequence numbers to displayed thumbnails. 1 With the SUB CLIP button off, press the THUMBNAIL button, turning it on. Thumbnails of the clips on the disc appear. 2 Press the MENU button. The CLIP menu appears. 3 Use the - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 62
you to select material (clips) from the material recorded on a disc and perform cut editing. You can do this by operating on this unit only. • Scene selection is with the scene selection function can be used on XPRI and other full-feature nonlinear editing systems. 4 Chapter Chapter 4 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 63
SHIFT TOP F REV F FWD END STANDBY OUT REC VAR JOG SHUTTLE PDW-F335/F355 PDW-F75 EJECT Load a clip list (see page 77) Create and edit a 73) • Deleting sub clips (see page 74) Clip 1 Clip 2 Clip 3 Clip 4 Recorded material Select clips Sub Sub Sub clip 1 clip 2 clip 3 Clip list 1 Save the - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 64
a recording start point and a recording end point. Clips have numbers beginning with C, for example C0001. Recording start point of Recording end then the part of clip 3 shown in gray color is played. Instead of using clip numbers, you can manage clips by assigning clip titles. For details, see - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 65
00100, the next clip to be created will have the title "SCENE-00100". 1 Select OPERATIONAL FUNCTION >CLIP TITLE >TITLE in the setup menu, and then press the ,/ OUT that are created or recorded by XDCAM devices. Clips: C0001 to C0300 Clip lists: E0001E01 to E0099E01 You can use the supplied PDZ-1 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 66
Set OPERATIONAL FUNCTION >FILE NAMING >AUTO NAMING to "free". You are now able to use clips and clip lists with userdefined names. 3 Set OPERATIONAL FUNCTION > SETUP MENU OPERATIONAL FUNCTION FILE NAMING AUTO NAMING .title * C**** title The same name will now be given to newly recorded clips. Clip - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 67
a clip with a chapter registered. • Select while playing back and searching. You can select the scene to use while viewing the video (quick scene selection). Before starting Insert a disc containing recorded clips into the unit. Including Clips Selected in the Thumbnail Screen in the Clip List SUB - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 68
in step 4, the display shows the state with no clips loaded as shown below. Select NEW FILE to create a new clip list. Chapter 4 Scene Selection 3 Use the M/MARK1 or m/MARK2 button to select LOAD CLIP LIST, and then press the SET button. A clip list selection screen appears. For an already created - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 69
Scene Selection 8 Use the arrow buttons or jog dial to select the desired clip. You can also select clips with the following operations. Press the desired position. You can also move the I-shaped cursor with the following operations. Press the PREV or NEXT button: Moves the cursor to the previous - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 70
. For details, see "Saving the Current Clip List to Disc" (page 75). To add sub clips using the chapter function The chapter function allows a thumbnail to be displayed for each shot mark recorded within a clip. For details, see Chapter 3 "Searching for Frames with Essence Marks" (page 56). 1 Carry - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 71
use a trimming operation (see page 73) to change In and Out points set by the quick scene selection function. 2,3,4 2,3 ACCESS NETWORK LOCAL REMOTE LEVEL PHONES 0 0 -12 -12 -20 -20 -30 -30 -40 -40 -60 1 2 -60 3 4 4CH 16 BIT 3+4 MPEG HD the clips. Clips recorded on the disc Clip - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 72
Operations 1 3,5 2,4 ACCESS NETWORK LOCAL REMOTE LEVEL PHONES 0 0 -12 -12 -20 -20 -30 -30 -40 -40 -60 1 2 -60 3 4 4CH 16 BIT 3+4 MPEG HD the target sub clip of the operation. (A timecode setting screen appears if you have selected TC PRESET.) 4 Use the arrow buttons or jog dial - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 73
Disc" (page 75). Modifying the In and Out Points of Sub Clips (Trimming) Proceed as follows. 1 Carry out steps 1 to 5 of the procedure in "Basic Operations" (see page 72) (select TRIM in step 2). The first frame (In point frame) of the selected sub clip appears. In this state, you can carry - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 74
proceed as follows. 1 Carry out steps 1 to 4 of the procedure in "Basic Operations" (see page 72) (select TC PRESET in step 2). The timecode setting screen appears. clip list window without deleting any sub clip Press the RESET button. 3 Use the - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 75
carry out this operation. If you are going to use the created or edited record because of some other reason, for example not enough free capacity on the disc. 2 2,3 ACCESS NETWORK LOCAL REMOTE LEVEL PHONES 0 0 -12 -12 -20 -20 -30 -30 -40 -40 -60 1 2 -60 3 4 4CH 16 BIT 3+4 MPEG HD - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 76
help. Managing Clip Lists After you create or edit a clip list, you can use the CLIP menu to save it to disc, load it from disc into unit button. The CLIP menu items you can display and select vary with the operating state of the unit (see the following table). Item CLIP INFORMATION LOAD CLIP - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 77
the M/MARK1 or m/MARK2 button to select "CLIP INFORMATION", and then press the SET button. A screen appears allowing you to select information items to display. 3 Use the M/MARK1 or m/MARK2 button to select the items you want to display, and then press the SET button. DATE: Date and time of creation - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 78
Scene Selection See "Displaying the CLIP menu" (page 76). 2 Use the M/MARK1 or m/MARK2 button to select "SORT CLIP LISTS or last clip by pressing the PREV or NEXT button with the SHIFT button held down. 3 Use the M/MARK1 or m/MARK2 button to select the type of sorting. NAME: Sort in ascending order - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 79
(XDCAM Application) into the CD-ROM drive of your computer, navigate to the PDZ-1 directory, and run the installer in the directory for your operating system recording in the LP format). For details, see "File Operations in File Access Mode (for Windows)" (page 83). 79 Using the PDZ-1 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 80
Overview A remote computer can be connected to this unit and used to operate on recorded data which has been saved in data files, such as video and audio data files. Use FAM (file access mode) for the computer connection. Directory Structure The following figure shows the directory structure - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 81
.XML ALIAS.XML a) DISCMETA.XML MEDIAPRO.XML Other files Content Operations Read/Partial read Write/Partial write Rename Contains data for management and recording format (MPEG HD/DVCAM and number of audio channels) of the recorded sections of the disc, and which can be overwritten by XDCAM. c) - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 82
the file or directory is corrupt and cannot be read. 1) PDW-F350/F330, PDW-530/510, PDW-F70/F30, PDW-1500, PDW-R1, PDW-V1, PDW-D1, and PDW-70MD. Edit directory File name E*E01.SMI a) E*M01.XML a) Other files Content Operations Clip list file *: 0001 to 0099 Metadata file generated automatically - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 83
driver Insert the supplied CD-ROM (XDCAM Application) into the CD-ROM drive of your computer, navigate to the FAM Driver directory, and run the installer in the directory for your operating into the following state. • Recording, playback, search and other disc operations: Stopped • THUMBNAIL button ( - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 84
XDCAM PDW-F75 IEEE 1394 SBP2 Device" and click "OK". In Windows XP, "Sony XDCAM PDW-F75 IEEE 1394 SBP2 Device" is deleted from the list of "hardware devices". In Windows Vista, the message "This device can be safely removed from your computer." appears. This unit can now resume normal operations - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 85
computer (see the next item). To install the FAM driver Insert the supplied CD-ROM (XDCAM Application) into the CD-ROM drive of your computer, and execute the FAM Driver >Mac >FAM Driver 1.1.1.dmg file, then follow the installation instructions. For details, refer to the ReadMe file contained on - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 86
computer, indicating that the computer is now able to perform file operations. Operation limitations during FAM connections • With the exception of the EJECT button, recording buttons and playback control buttons are disabled. • Do not use the EJECT button to eject discs. Always eject discs from the - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 87
5 File Operations Recording Continuous Timecode over FAM Connections For clips created over a FAM connection, you can record so that the timecode is continuous with the timecode of the last frame of the last clip recorded on the disc. To record continuous timecode Before you start recording, set - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 88
The function menu appears on the LCD panel of this unit. The following figure shows the buttons used in function menu operations. 0 0 -12 -12 -20 -20 -30 -30 -40 -40 -60 1 2 -60 3 4 4CH 16 BIT 3+4 MPEG HD SP 1080 60I VITC COOO1 REM:077M 00: 00 .00: 00 TCG EXT TC MODE PRESET - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 89
Setting item F1: TCG (timecode generator) Description Sets the operation of the internal timecode generator. INT (internal): The count value advances from a preset initial value, or advances consecutively from the timecode of the last frame recorded on the disc. EXT (external): Synchronize to the - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 90
of the internal timecode generator. REC RUN: The timecode generator runs only during recording. FREE RUN: The timecode generator runs as long as the unit is powered section (TC or VITC). Use this item to select dropframe mode (DF) or non-dropframe mode (NDF). System Menu Use the system menu to set - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 91
are found on the second or third level. Setting items are divided into basic items, which are needed for normal operations, and enhanced items, which are needed for enhanced operations. In the figures, basic items are shown in bold characters. When the unit is shipped from the factory, the setup - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 92
SETUP MENU Top level OPERATIONAL FUNCTION DISPLAY CONTROL TIME CODE DISC PROTECTION VIDEO CONTROL FORM AUTO NAMING SYSTEM FREQ UC/J SELECT 23.9P OUTPUT VIDEO GAIN CHROMA GAIN CHROMA PHASE SETUP LEVELa) HD SYNC PHAS SD SYNC PHAS OUTPUT SCH AUTO SQUEEZE CONV MODE DETAIL GAIN CONV MODE LETTER BOX H - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 93
MODE NETWORK ENABLE WIRELESS RMT INDEX POSITION STORE OWNER UMID ESSENCE MARK HD VANC INPUT DATA ITEM OUT RECALL BANK1 RECALL BANK2 RECALL BANK3 SAVE indicates that a setting is the factory default. OPERATIONAL FUNCTION [Operational]: Operation settings REPEAT MODE [> REPEAT]: Determine whether or - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 94
in the recording/playback control block cannot be operated. *STOP & EJECT [>> STOP&EJ]: Only the STOP button and EJECT button can be operated. ALL the settings made here. UC/J SELECT [>> UC/J sel]: Select the area of use. 23.9P OUTPUT [>> 23.9P out]: Select the monitor output when the SYSTEM - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 95
[> After CUE]: Select the operating mode following cue-up. ASM POSTROLL [> Postroll]: Specify whether to record postroll when executing assemble editing [>> 5 sec] A preroll time of at least 5 seconds is recommended when using this unit for editing. When an editing control unit such as the BVE-700A - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 96
monitor. Description *TIME DATA & STATUS [>> Time&STA]: Time data and the operating mode of the unit TIME DATA & UB [>> Time&UB]: Time data and user [>> PB remain]: Time from the current playback position to the recording end position, displayed in time data format MENU DISPLAY [> Menu DISP - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 97
DISPLAY CONTROL [Display]: Settings related to display on the LCD panel of this unit and on an external monitor HD CHARA [> HD char]: Specifies the HD output connector(s) to which superimposed text information is output when CHAR SEL in page P1 of the function menu is set to "ON". SD CHARA [> - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 98
menu to "SG", the internal signal generator is activated and outputs the selected test signal. You can record this signal. HD SIGNAL [>> HD Signal]: Select the test signal for HD output. SD SIGNAL [>> SD Signal]: Select the test signal for SD output. Description *100% COLOR BARS [>>> CB100 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 99
to be superimposed on the 1st ON [>> ON]: Do not suppress. field of the output video signal. Note When you play back a disc with a recorded closed caption signal, the closed caption signal is multiplexed into SDSDI and composite output only. CC (F2) BLANK [> CC2 blank]: Select whether to suppress - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 100
SD input and output, specify whether to record and play back with the addition of screens appear for the following items. Use the jog dial to make settings, and 271 [>>> 271] Factory default setting: *0 [>>> 0] HD SYNC PHAS [>> HD S PHAS]: Adjust HD sync phase. -2200 [>>> -2200] to 2199 [>>> 2199 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 101
HD-SD converter output is 16:9. 14:9 [>> 14:9]: The aspect ratio of HD-SD converter output is 14:9. 13:9 [>> 13:9]: The aspect ratio of HD . *OFF [>> OFF]: The image enhancer uses default settings for cross color. ON [>> MODE [> REC mode]: Select the audio recording mode. *4ch×16bit [>> 4ch/16bit]: - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 102
audio output reference level. INT AUDIO SG [> Audio SG]: Select the operation of the internal audio test signal generator. When you set A1 INPUT signal generator is activated and outputs the selected test signal. You can record this signal. SILENCE [>> silence]: Silent signal *1kHz SINE [>> 1kHz]: - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 103
Use the REMOTE(9P) connector to connect several PDW-F75 units and perform remote control from one of them specified as the parent. HDSDI [>> HDSDI]: Use the HDSDI INPUT connector to control start and stop of recording disable operation : *17LINE (line 17) HD VANC LINE [>> HD line]: When SDI OUT is - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 104
line 20. Factory default setting:*17LINE (line 17) HD VANC INPUT [> HD VANC IN]: Make settings related to recording of the VANC data contained in HDSDI input. that does not support DATA ITEM. SETUP BANK OPERATION [Setup Bank]: Settings related Description to menu bank operations Menu bank: This - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 105
using the setup menu. enhanced items. Setup Menu Operations This section explains how to change menu settings. Buttons used to change settings Use :OFF MENU DISPLAY :WHITE BRIGHTNESS :55 ALARM :ON MENU STATUS :DIS HD CHARA :ALL Current setting 3 Press the M/MARK1 or m/MARK2 button to - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 106
OFF MENU DISPLAY :WHITE BRIGHTNESS :55 ALARM :ON MENU STATUS :DIS HD CHARA :ALL 4 Press the ,/OUT button. This displays all possible settings See step 4 of the foregoing operating procedure (see page 106). Hiding enhanced items The setup menu can be used to hide enhanced items. To hide - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 107
OPERATION MENU GRADE BASIC Current setting Returning menu settings to their factory default settings After making menu setting changes, to return settings to their factory default settings (setting initialization), use ]: Deletes the most recently recorded clip. Chapter 6 Menus System Menu 107 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 108
on the disc, including the contents of the General directory. Disc Menu Operations To display the status of the current disc or clip Insert a disc, CLIP STATUS CLIP LIST MODE CLIP LIST NEME: TITLE: RECORD DEVICE: SERIAL: DATE : TIME : E0001 E0001 PDW-F75 10001 06/3/02 19:54:38 TO MENU : MENU - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 109
Chapter 6 Menus To clear the menu from the screen Press the MENU button. To format a disc See "Formatting a Disc" (page 44) in Chapter 3. System Menu 109 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 110
boards installed by a trained technician. Refer to the operation manual supplied with each board for information about installing, configuring, and operating the board. Contact your Sony dealer regarding installation of option boards. Using the PDBK-101 Network Board (Gigabit Ethernet) Installing - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 111
PDW-F75 operation manual manual when making connections. ATTENTION Par mesure de sécurité, ne raccordez pas le connecteur pour le câblage de périphériques pouvant avoir une tension excessive au port de cet appareil. Suivez les instructions dans ce manuel pour les raccordements. Chapter 7 Using - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 112
record the input on XDCAM discs. You can also output video and audio from this unit to HDV devices. 1) HDV and are trademarks of Sony Corporation and Victor Company of Japan, Limited. HDV Connection Example The following example shows a connection between this unit and an HDV camcorder. PDW-F75 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 113
PDW-F75 EJECT Notes • Install the PDBK-104 in option slot 2. • The PDBK-102 and PDBK-103 cannot be used when the PDBK-104 is installed. • Select SDSDI or composite signals in the input video selection menu. These menu items appear only when the optional input board is installed. • To record - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 114
operating problems If you should experience problems with the unit, contact your Sony dealer. Use and storage locations Store in a level, ventilated place. Avoid using . Such pixels have no effect on the recorded data, and the unit may be used with confidence even if they are present. Condensation - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 115
Digital Hours Meter The digital hours meter can provide information about the operational history of the unit. Use the information as a guide in scheduling periodic maintenance. For periodic maintenance, contact your Sony dealer. To display digital hours meter The digital hours meter appears in - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 116
Troubleshooting Alarms An alarm (warning message) appears in the time data display section when an operation is attempted which is inappropriate for the settings on this unit or the state of the disc. Both the alarm message and the action to take to resolve the problem Sony SERVICE IF - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 117
SERVICE. Description/action The NVRAM battery is exhausted. Contact your Sony SUPPORTED. RECORDING AND PLAYBACK IS NOT POSSIBLE. A disc in an unsupported recording format is loaded. Use a disc formatted in the MPEG HD LIMITED". During front panel operations Alarm message in time Troubleshooting - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 118
when a playback, search or delete operation is attempted on a disc with no clips recorded on it. Insert a disc with clips recorded on it. DISC TOP. This appears to "COUNTER", and you try to preset timecode or user bits. To use timecode or user bits, set CNTR SEL to "TC" or "UB Troubleshooting - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 119
Use another disc. CURRENT VERSION OF THE SOFTWARE SETS THE DISC WRITE PROTECTED. FILE SYSTEM ON THE DISC INHIBITS WRITING. This appears when you insert a disc that can be played back but not recorded. Exchange the disc for one with a file system supported try again. Appendix 119 Troubleshooting - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 120
recording and editing operations Alarm message in time data display section Input Sig!" a) HD 60I/30P a) HD 50I/25P a) HD RECORDED. HD 60I or HD 30P CLIP(S) EXIST. DISC CANNOT BE RECORDED. HD 50I or HD 25P CLIP(S) EXIST. DISC CANNOT BE RECORDED. HD USE COMMON REFERENCE SIGNAL OR CONNECT RECORDER - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 121
USE DISC WITH HD 50I or HD 25P RECORDING. DISC CANNOT BE PLAYED BACK. USE DISC WITH HD 23.98P RECORDING. DISC CANNOT BE PLAYED BACK. USE DISC WITH DVCAM 625/50 RECORDING. DISC CANNOT BE PLAYED BACK.USE DISC WITH HD 60I or HD 30P RECORDING. DISC CANNOT BE PLAYED BACK.USE DISC WITH HD 23.98P RECORDING - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 122
INHI! The disc is write protected. This appears when an attempt is made to execute an operation that requires recording while the disc is write protected. DISC FULL! The disc is full. This appears when an attempt the function menu (see page 88). • Input an HDSDI signal. Appendix 122 Troubleshooting - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 123
specifications of the connected devices, you may need to use certain functions differently, and you may not be able to transfer data or perform certain operations. i.LINK, a nickname for IEEE 1394 proposed by Sony, is a trademark supported by many companies worldwide. IEEE 1394 is an international - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 124
supports is identified on the specifications page of the operating instructions to the operating instructions supplied with the connected device. Use Sony i.LINK cables Use Sony i.LINK cables Recording format Video MPEG HD: HQ35/SP25/LP18 Mbps DVCAM: 25 Mbps Proxy video MPEG-4 1) Audio MPEG HD - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 125
. 85 minutes Approx. 90 minutes LP mode 112 minutes or 122 minutes or more more Approx. 85 minutes PFD50DLA discs Recording Mode format 4-channel audio 2-channel audio MPEG HD HQ mode 145 minutes or 150 minutes or more more SP mode Approx. 190 minutes Approx. 200 minutes LP mode 248 - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 126
Operating Instructions English version (1) Japanese version (1) CD-ROM manual (1) Infrared remote commander (1) Warranty Booklet (1) XDCAM Part number 1-551-631-61 (250 V, 10 A, about 2.0 m) Protocol Manual (part number 9-968-084-0X) PDBK-101 Network Board PDBK-102 MPEG-TS Input/Output Board - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 127
OR REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE. • Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 128
UMID Data Metadata is additional information recorded on discs along with audio-visual data. It is used to bring greater efficiency to the flow of operations from material acquisition through editing, and to make it easier to find and reuse material. As one of application of metadata, the UMID - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 129
these codes. 2 Set the ownership information using the arrow buttons and jog dial. Arrow buttons code. Notes • There are no problems in recording or playing back audio-video signals, rule, the code "00" must be entered. Freelance operators who do not belong to an origination should enter "~". - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 130
THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 video information in any manner (such as online video distribution service, internet broadcasting, TV broadcasting). Other usage of this product - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 131
E-E mode Electric-to-Electric mode. When you operate a VDR in E-E mode, input video and/ XDCAM equipment records essence marks as part of Non-RealTime metadata, and uses them to display thumbnails. HD code, which causes problems when editing programs in units of seconds using the number of frames - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 132
the "Source Pack" contains information such as the time and location of recording. A UMID with the Basic section only is called a Basic UMID. A total of 32 bits are provided in the time code which the user can use to record such information as date, reel number, or scene number on video tape or disc - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 133
28 cut editing 30 editing control unit settings 34 using an editing control unit 31 viewing HD video 28 viewing SD video 29 CONTROL connector 24 recent recorded clip 108 displaying 90 displaying the status of the current disc/clip 108 formatting a disc 109 operations 108 Disc recorder connection - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 134
essence marks 50 to specify the frame to use as the thumbnail image 49 using the Clip Continuous Rec function 50 using the HDSDI remote control function 50 when recording does not end normally 45 Recording inhibit mode 18 Recording/playback format 18 REF VIDEO INPUT connectors 22 Reference signal - Sony PDWF75 | User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 135
data type 18 Timecode 46 recording after setting an initial value 47 recording external timecode directly 49 recording sequentially upon the last recorded timecode 48 recording with the internal timecode generator synchronized to external timecode 48 TOP button 20 Troubleshooting 116 U UMID Data 128
3-270-589-
12
(1)
Professional Disc
Recorder
Operating Instructions
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
PDW-F75
© 2007 Sony Corporation
The supplied CD-ROM includes operating instructions of the PDW-F75
professional disc recorder (English, Japanese, French, German, Italian, Spanish
and Chinese versions) in PDF format.
For more details, see “Using the CD-ROM Manual” on page 14.
Sony Corporation
Printed in Japan
Printed on recycled paper.