Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 97
TIME CODE [Time Code]: Settings related to the timecode, VITC POS SEL-1 [> VITC pos-1]
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
DISPLAY CONTROL [Display]: Settings related to display on the LCD panel of this unit and on an external monitor HD CHARA [> HD char]: Specifies the HD output connector(s) to which superimposed text information is output when CHAR SEL in page P1 of the function menu is set to "ON". SD CHARA [> SD char]: Specifies the SD output connector(s) to which superimposed text information is output when CHAR SEL in page P1 of the function menu is set to "ON". Description HDSDI2 [>> HDSDI2]: Superimposed text is output to the HDSDI OUTPUT 2 connector only. It is off for the HDSDI OUTPUT 1 and MONITOR connectors. *ALL [>> ALL]: Superimposed text is output to both of the HDSDI OUTPUT 1 and 2 connectors and to the MONITOR connector. OFF [>> OFF]: Superimposed text is off for both of the HDSDI OUTPUT 1 and 2 connectors and for the MONITOR connector. SDI [>>SDI]: Superimposed text is output to the SDSDI OUTPUT connector only. It is off for the COMPOSITE OUTPUT connector. COMPOSITE [>> COMP]: Superimposed text is output to the COMPOSITE OUTPUT connector only. It is off for the SDSDI OUTPUT connector. *ALL [>> ALL]: Superimposed text is output to both the SDSDI OUTPUT connector and the COMPOSITE OUTPUT connector. OFF [>> OFF]: Superimposed text is off for both the SDSDI OUTPUT connector and the COMPOSITE OUTPUT connector. TIME CODE [Time Code]: Settings related to the timecode Description generator TCG REGEN [> TCG regen]: Select the signals to generate when the timecode generator is set to regenerate mode (TC MODE on page P2 of the function menu is set to "REGEN"). *TC & UB [>> TC & UB]: Regenerate both timecode signals and user bits signals. TC [>> TC] :Regenerate timecode signals only. UB [>> UB]: Regenerate user bits signals only. UB BINARY GP. [> Binary Gp.]: Settings related to the user bits binary group flag. Note When TCG on page P2 of the function menu is set to anything other than "INT", and TC MODE is set to "REGEN", the user bits binary flag setting of external timecode is followed. *000:NOT SPECIFIED [>> 000]: Character set not specified 001:ISO CHARACTER [>> 001]: 8-bit characters conforming to ISO 646 and ISO 2022 010:UNASSIGNED-1 [>> 010]: Undefined 011:UNASSIGNED-2 [>> 011]: Undefined 100:UNASSIGNED-3 [>> 100]: Undefined 101:PAGE/LINE [>> 101]: Multiplex 110:UNASSIGNED-4 [>> 110]: Undefined 111:UNASSIGNED-5 [>> 111]: Undefined VITC POS SEL-1 [> VITC pos-1]: Select a line to insert the VITC in. Note You can insert the VITC signal in two places. To insert it in two places, set both this item and VITC POS SEL-2. When the system frequency is 60i, 23.98P or 30P 20LINE [>> 20 line] to 12LINE [>> 12 line]: Select any line from 12 to 20. Factory default setting: *16 LINE [>> 16 line] (line16) Note When the system frequency is 60i, 23.98P, or 30P, the VBID (Video Blanking ID) receives priority over a selection of "20LINE". When the system frequency is 50i or 25P 22LINE [>> 22 line] to 9LINE [>> 9 line]: Select any line from 9 to 22. Factory default setting: *19 LINE [>> 19 line] (line 19) Chapter 6 Menus 97 System Menu