Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 124
Specifications, About data transfer speed of i.LINK, i.LINK operation with this unit, General, System
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Note The unit can be connected to one device with the i.LINK cable (DV cable). When you connect with a device that has two or more i.LINK connectors, refer to the operating instructions supplied with the connected device. About data transfer speed of i.LINK i.LINK defines maximum data transfer speeds of approximately 100, 200 and 400 Mbps 1) that are referred to as S100, S200 and S400 respectively. The maximum data transfer speed that an i.LINK device supports is identified on the specifications page of the operating instructions supplied with the device or near its i.LINK connector. When you connect a device that supports different data transfer speeds, the actual data transfer speeds may be different from those indicated on the i.LINK connectors. 1) What is Mbps? Megabits per second. A measure of the rate at which data is transmitted per second. In case of 100 Mbps, 100 Megabits of data can be transmitted per second. Specifications General External dimensions (w/h/d, excluding projections) 307 × 100 × 411 mm (121/8 × 4 × 161/4 inches) 411(161/4) 100(4) i.LINK operation with this unit For details on operation when other equipment with an i.LINK (DV) connector is connected, see Chapter 2 (page 27). For details on connection with an i.LINK cable and the necessary software, refer to the operating instructions supplied with the connected device. Use Sony i.LINK cables Use Sony i.LINK cables to connect the i.LINK devices. 6 pins y 4 pins (For DV dubbing) 6 pins y 6 pins (For DV dubbing) i.LINK and are trademarks. 307(121/8) in mm (inches) Mass 7.2 kg (15 lb 13 oz) Power requirements 100 V to 240 V AC, 50/60 Hz Power consumption 0.79-0.33 A Peak inrush current (1) Power ON, current probe method: 45 A (240 V), 15 A (100 V) (2) Hot switching inrush current, measured in accordance with European standard EN55103-1: 7 A (230 V) Operating temperature 5ºC to 40ºC (41ºF to 104ºF) Storage and transport temperature -20ºC to +60ºC (-4ºF to +140ºF) Operating relative humidity (no condensation allowed) 25% to 80% (RH) Storage and transport relative humidity (no condensation allowed) 20% to 90% System Recording format Video MPEG HD: HQ35/SP25/LP18 Mbps DVCAM: 25 Mbps Proxy video MPEG-4 1) Audio MPEG HD: 16 bits, 48 kHz, 4/2 channels Appendix 124 Specifications