Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 41
Information displayed, frequency 60I/30P only
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2 Preparations Information displayed 1 Type of time data 2 Timecode reader drop frame mark a) Time data 3 Timecode generator drop frame mark a) 4 VITC field mark TCR 0 0 : 0 4 . 4 7 . 0 7 * PLAY L OC K 6 Operation mode 5 Menu setting states a) Only when the system frequency is 60I/30P. Note The display shown above corresponds to the factory default settings of the unit. You can use DISPLAY CONTROL >DISPLAY INFO (see page 96) in the setup menu to change the information shown in the second line. See page 105 "Setup Menu Operations" in Chapter 6 for more information about how to use the setup menu. a Type of time data Display Meaning CNT Counter data TCR TC reader timecode data UBR TC reader user bits data TCR. VITC reader timecode UBR. VITC reader user bits data TCG TC generator timecode UBG TC generator user bits data IN In point time data OUT Out point time data DUR Duration between In point and Out point Note If the time data or user bits cannot be read correctly, they will be displayed with an asterisk. For example, "T*R", "U*R", "T*R." or "U*R.". b Timecode reader drop-frame mark (for system frequency 60I/30P only) ".": Indicates drop-frame mode ":": Indicates non-drop-frame mode c Timecode generator drop-frame mark (for system frequency 60I/30P only) ".": Indicates drop-frame mode (factory default) ":": Indicates non-drop-frame mode d VITC field mark " " (blank): Fields 1 and 3 (for system frequency 60I/30P) or fields 1, 3, 5 and 7 (for system frequency 50I/25P) "*": Fields 2 and 4 (for system frequency 60I/30P) or fields 2, 4, 6 and 8 (for system frequency 50I/25P) e Menu setting states This is displayed when the setup menu item DISPLAY CONTROL >MENU STATUS is set to "ENABLE" (see page 96). Display B1 B2 B3 DF No display Description The current menu settings are the same as the settings in menu bank 1. The current menu settings are the same as the settings in menu bank 2. The current menu settings are the same as the settings in menu bank 3. The current menu settings are the same as the factory defaults. The current menu settings are different from all of the above. f Operation mode The field is divided into two blocks as shown below. • Block A displays the operation mode. • Block B displays the servo lock status or playback speed. A B Display Block A Block B DISC OUT LOADING UNLOADING STANDBY OFF STOP NEXT PREV F.FWD F.REV PLAY Operation mode Disc is not loaded. Disc is being loaded. Disc is being unloaded. Standby-off mode Stop mode Cuing up to the first frame of the next clip. Cuing up to the first frame of the current clip. Fast forward search Fast reverse search Playback mode (servo unlocked) 41 Superimposed Text Information