Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 98
VIDEO OUTPUT PHASE [>> V output]
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
TIME CODE [Time Code]: Settings related to the timecode Description generator VITC POS SEL-2 [> VITC pos-2]: Select a line to insert the VITC in. Note You can insert the VITC signal in two places. To insert it in two places, set both this item and VITC POS SEL-1. When the system frequency is 60i, 23.98P or 30P 20LINE [>> 20 line] to 12LINE [>> 12 line]: Select any line from 12 to 20. Factory default setting: *18 LINE [>> 18 line] (line18) Note When the system frequency is 60i, 23.98P, or 30P, the VBID (Video Blanking ID) receives priority over a selection of "20LINE". When the system frequency is 50i or 25P 22LINE [>> 22 line] to 9LINE [>> 9 line]: Select any line from 9 to 22. Factory default setting: *21 LINE [>> 21 line] (line 21) EE OUT PHASE [> EE out]: Determine the output phase for the LTC signal output from the TIME CODE OUT connector when recording timecode and in STOP REC mode (forced E-E mode). *MUTING [>> muting]: Suppress the output. THROUGH [>> through]: Output the timecode input to the TIME CODE IN connector as it is. VIDEO INPUT PHASE [>> V input]: Output the timecode with the same phase as the input video signal phase. VIDEO OUTPUT PHASE [>> V output]: Output the timecode with the same phase as the output video signal phase. SEARCH MUTING [> Srch muting]: Select whether to OFF [>> OFF] : Do not suppress. suppress the output from the TIME CODE OUT connector *ON [>> ON]: Suppress. in search (jog/shuttle) mode. PD PRESET [> PD preset]: Select the timecode to preset. The A-frames of pulldown sequences are preset. (This appears only when 24P (2-3 pulldown) is selected.) 24F TC [>> 24F TC]: Timecode value that becomes the reference for A-frames. 30F TC [>> 30F TC]: Pulldown value with respect to the above 24-frame timecode. VITC [> VITC]: Specifies whether or not to record VITC generated by the internal timecode generator when recording DVCAM-format signals. OFF [>> OFF]: Do not record VITC. *ON [>> ON]: Record VITC. DISC PROTECTION [Disc protct]: Settings related to disc protection STILL TIMER [>> STL timer]: Specify the length of time the unit can be in still image mode before switching to disc protection mode. Description 0.5SEC [>>> 0.5 sec] to 30MIN [>>> 30 min]: Select time from 16 settings ranging from 0.5 second to 30 minutes. Factory default setting: *8MIN [>>> 8 min] (8 minutes) VIDEO CONTROL [Video]: Settings related to video control INT VIDEO SG [> Video SG]: Select the test signal to be output from the internal test signal generator. When you set V INPUT in the HOME page of the function menu to "SG", the internal signal generator is activated and outputs the selected test signal. You can record this signal. HD SIGNAL [>> HD Signal]: Select the test signal for HD output. SD SIGNAL [>> SD Signal]: Select the test signal for SD output. Description *100% COLOR BARS [>>> CB100]: 100% color bar signal RAMP (Y/C) [>>> Ramp]: Bias signal GRAY [>>> Gray]: Grayscale signal BLACK [>>> Black]: Black signal *100% COLOR BARS [>>> CB100]: 100% color bar signal BLACK BURST [>>> BB]: Black burst signal Chapter 6 Menus 98 System Menu