Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 123
Error Messages, To Eject Discs with the Unit Powered Off, About i.LINK
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Alarm message in time data display section EMPHASIS! a) Alarm message in monitor video section INPUT AUDIO EMPHASIS IS NOT SUPPORTED. CHECK THE EMPHASIS OF THE AUDIO INPUT SIGNAL. Action Check the emphasis of the audio input signal. a) Displayed only when DISPLAY CONTROL >ALARM is set to "ON". Alarms relating to sensors and drives Alarm message in time data display section FAN Stopped DR-FAN Stop High TEMP! Alarm message in monitor video section FAN MOTOR STOPPED. DRIVE FAN MOTOR STOPPED. HIGH TEMPERATURE. HIGH TEMPERATURE IN DRIVE. Description/action Contact your Sony dealer. Note The unit will not stop operating, but if you continue to use it in this state temperatures inside the unit or the drive will rise, possibly resulting in failure or fire. Error Messages Error codes appear in the time data display when an error (usually a hardware problem) occurs. In addition, both error messages and error codes appear in the monitor video section and on the video monitor connected to the unit. When an error message appears, follow the instructions in the error message to resolve the problem. Error code Error code in time data display section ERROR AN ERROR HAS BEEN DETECTED. INFORM SERVICE OF FOLLOWING CODE: 50-010 PRESS EJECT KEY TO EJECT DISC. Error code in monitor video section To Eject Discs with the Unit Powered Off As an emergency measure, disc cartridges can be removed with the unit powered off. This operation should always be done by a trained service technician. About i.LINK This section explains the specifications and features of i.LINK. What is i.LINK? i.LINK is a digital serial interface designed to integrate devices equipped with i.LINK connectors. i.LINK allows your device to: - Perform two-way transmission and reception of data such as digital audio and digital video signals. - Control other i.LINK devices. - Easily connect multiple devices with a single i.LINK cable. Your i.LINK device is capable of connecting to a wide range of digital AV devices for data transfer and other operations. Other advantages include the following feature. When connected to multiple i.LINK devices, your i.LINK device can perform data transfer and other operations not only with the directly connected devices but also with any of the devices that are connected to those devices. Therefore, you do not need to be concerned with device connection order. However, depending on the features and specifications of the connected devices, you may need to use certain functions differently, and you may not be able to transfer data or perform certain operations. i.LINK, a nickname for IEEE 1394 proposed by Sony, is a trademark supported by many companies worldwide. IEEE 1394 is an international standard defined by IEEE, the Institute of Electrical and Electronics Engineers, Inc. Appendix 123 About i.LINK