Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 47
To record timecode after setting an initial, value Internal Preset, To set user bits
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 3 Recording and Playback To record timecode after setting an initial value (Internal Preset) To set an initial value 1 2 3,5 5 4,5 ACCESS NETWORK LOCAL REMOTE LEVEL PHONES CH 1 CH 2 CH 3 F1 F2 CH 4 F3 F4 CHAPTER MENU MARK1 F5 EXPAND PAGE DISPLAY SUB THUMB IN CLIP NAIL SET RESET VARIABLE REC PRESET PB KEY INHI CLIP ESSENCE MENU MARK PREV PLAY NEXT MARK2 STOP SHIFT TOP F REV F FWD END STANDBY OUT REC VAR JOG SHUTTLE EJECT 6 1 Make the following settings in the function menu. • Set CNTR SEL on page P1 to "TC". • Set TCG on page P2 to "INT". • Set TC MODE on page P2 to "PRESET". 2 Press the DISPLAY button to maximize the monitor video section. 3 Press the MENU button. The system menu appears on the display. 4 Select "TC PRESET" using the M/MARK1 button or m/MARK2 button, then press the ,/OUT button. The TC PRESET MODE screen appears. TC PRESET MODE TCG 00:00:00:00 6 Press the SET button. The message "NOW SAVING..." appears, and the timecode set in step 5 is displayed. If RUN MODE on page P2 of the function menu is set to "FREE RUN", timecode begins to advance from the initial value you just set. To set timecode to the current time 1 Set RUN MODE on page P2 of the function menu to "FREE RUN", and set DF/NDF to "DF". 2 Carry out steps 1 to 5 of the previous section "To record timecode after setting an initial value (Internal Preset)" to set the timecode to a time slightly ahead of the current time. 3 Press the SET button at the instant when the current time matches the displayed timecode. To set user bits You can record up to eight hexadecimal digits of information (date, time, clip number, etc.) in the timecode track. 1 Set CNTR SEL on page P1 of the function menu to "UB". 2 Carry out steps 2 to 4 of the previous section "To record timecode after setting an initial value (Internal Preset)" (see page 47). The UB PRESET MODE screen appears. UB PRESET MODE UBG 00:00:00:00 INC/DEC : ( )( )KEY SHIFT : ( )( )KEY CLEAR : RESET KEY DATA SAVE : SET KEY ABORT : MENU KEY INC/DEC : ( )( )KEY SHIFT : ( )( )KEY CLEAR : RESET KEY DATA SAVE : SET KEY ABORT : MENU KEY 5 Use the arrow buttons and the RESET button to set the initial timecode value.