Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 102
AUDIO CONTROL [Audio]: Settings related to audio, CH3/CH4 IN [>> CH3/CH4]
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
AUDIO CONTROL [Audio]: Settings related to audio control Description DATA MODE [> Data mode]: Specify whether to handle digital audio signals as non-audio signals during recording. CH1/CH2 IN [>> CH1/CH2]: Specify for the input to the DIGITAL AUDIO (AES/EBU) 1/2 connectors. *AUDIO [>>> Audio]: Handle as audio signals. DATA [>>> Data]: Handle as non-audio signals. CH3/CH4 IN [>> CH3/CH4]: Specify for the input to the DIGITAL AUDIO (AES/EBU) 3/4 connectors. LEVEL SELECT [> Level Sel] REF LEVEL [>> REF Level]: Specify the reference level (headroom) for audio signals recorded to disc. *-20dB [>>> -20dB] -18dB [>>> -18dB] -16dB [>>> -16dB] -12dB [>>> -12dB] CH1 IN LEVEL [>> CH1 input]: Select the audio level setting according to the audio level of the signal input to the AUDIO INPUT 1/3 connector. *+4dB [>>> +4dB] 0dB [>>> 0dB] -3dB [>>> -3dB] -6dB [>>> -6dB] CH2 IN LEVEL [>> CH2 input]: Select the audio level setting according to the audio level of the signal input to the AUDIO INPUT 2/4 connector. OUTPUT LEVEL [>> Out Level]: Select the analog audio output reference level. INT AUDIO SG [> Audio SG]: Select the operation of the internal audio test signal generator. When you set A1 INPUT to A4 INPUT in the HOME page of the function menu to "SG", the internal signal generator is activated and outputs the selected test signal. You can record this signal. SILENCE [>> silence]: Silent signal *1kHz SINE [>> 1kHz]: 1-kHz, -20 dB FS sine wave signal SHUTTLE MUTING [> Shtl muting]: Set the audio muting conditions during shuttle playback. *OFF [>> OFF]: Do not perform muting. ON [>> FULL]: Perform muting. EDIT POINT [> Edit Point]: Specify the type of editing for audio signals. CUT [>> Cut]: Cut editing (Discontinuity in audio signal may result at the editing point, causing noise during playback.) *FADE [>> Fade]: Fade in and fade out IN OUT DV OUT MODE [> DV out mod]: Select the audio output mode of the S400 connector. 4ch [>> 4ch]: 12 bit/32 kHz/4ch *2ch [>> 2ch]: 16 bit/48 kHz/2ch INTERFACE SELECT [Interface]: Settings related to interfaces D-SUB OUTPUT [> D-SUB Out]: Select the format of the signal output from the MONITOR connector. Description XGA(SYSTEM) [>> XGA(SYS)]: Set to XGA monitor output (according to system frequency). *XGA(60Hz) [>> XGA(60Hz)]: Set to XGA monitor output (fixed at 60 Hz). YPbPr [>> YPbPr]: Y/R-Y/B-Y component video signals Chapter 6 Menus 102 System Menu