Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 58
Repeat Playback, To cue up with sub clip thumbnail images
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 3 Recording and Playback To cue up with sub clip thumbnail images With the desired clip list loaded in the current clip list, proceed as follows. 1 Press the SUB CLIP button and the THUMBNAIL button, turning them on. Thumbnails of the first frames in the sub clips appear. Name of current clip list a) Sixth frame is selected from a total of 34 sub clips Sub clip information (date and time of creation, initial timecode, playback time) Currently selected sub clip Recording date and time of clip list Total playback time of sub clips in the clip list a) When a title has been assigned to a clip list, the title is enclosed in double quotation marks, for example "SAKURA". To return to the previous screen Press the THUMBNAIL button, turning it off. 2 Select the thumbnail whose clip you want to cue up (you can do this with the same operations as step 1 of "To select a thumbnail image and start playback" (see page 54)). 3 Press the SET button or the PLAY button. If you press the SET button, a still image appears showing the first frame of the selected sub clip. If you press the PLAY button, playback starts from the first frame of the selected sub clip. Note In clip lists, the first frame of the sub clip (the In point frame) is always displayed as the thumbnail. Repeat Playback You can perform repeat playback for normal and clip list playback. To perform repeat playback, set OPERATIONAL FUNCTION >REPEAT MODE in the setup menu to "ON" (a REPEAT indicator appears in the display), and then proceed as follows. 1 Insert a disc. To perform repeat playback for normal playback, proceed to step 3. 2 To perform repeat playback for clip list playback, load a clip list into the current clip list and then press the SUB CLIP button. 3 Press the PLAY button. Playback starts from the saved playback position. Normal playback: When playback of the last clip finishes, it resumes from the start of the disc, repeatedly playing from the first through the last clip on the disc. Clip list playback: When playback of the last sub clip finishes, it resumes from the start of the clip list, repeatedly playing from the first through the last sub clip in the clip list. Repeat playback begins the unit is powered on if it is powered on with a disc loaded and OPERATIONAL FUNCTION >REPEAT MODE in the setup menu set to "ON". Clip list playback starts from the first sub clip in the clip list. To start repeat playback from the device connected to the REMOTE (9P) connector Set OPERATIONAL FUNCTION >REPEAT MODE in the setup menu to "ON", and then send the command to start repeat playback from the external device. For details of commands, refer to the REMOTE (9-pin) Protocol Manual for the PDW series (not supplied). To stop repeat playback Do one of the following. • Set OPERATIONAL FUNCTION >REPEAT MODE in the setup menu to "OFF". • Operate any of the playback buttons except the PLAY button, or operate the jog or shuttle dial. • From the external device connected to the REMOTE (9P) connector on this unit, send a command other than the repeat playback start command to this unit. Note The unit enters search mode when you conduct a search, and stop mode at the end of the disc. 58 Playback