Sony PDWF75 User Manual (PDW-F75 Professional Disc Recorder Operating Manual f - Page 23
Digital signal input/output Digital audio signal input/output,
View all Sony PDWF75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Chapter 1 Overview 3 Digital signal input/output section 1 HDSDI INPUT connector HDSDI INPUT 2 HDSDI OUTPUT connectors 3 SDSDI OUTPUT connector HDSDI OUTPUT 1 2 SDSDI OUTPUT a HDSDI (HD serial digital interface) INPUT connector (BNC type) This inputs HD format video and audio signals. b HDSDI (HD serial digital interface) OUTPUT connectors (BNC type) These output HD format video and audio signals. When CHAR SEL on page P1 of the function menu is set to "ON", and DISPLAY CONTROL >HD CHARA in the setup menu is set to "ALL" (or either "HDSDI2" or "ALL" for the HDSDI OUTPUT 2 connector), information such as timecode, menu settings, and error messages is superimposed on the output signals (see page 40). c SDSDI OUTPUT connector (BNC type) This outputs SDSDI signals downconverted from HD video input signals, or the SDSDI signals being played back or being recorded. When CHAR SEL on page P1 of the function menu is set to "ON", and DISPLAY CONTROL >SD CHARA in the setup menu is set to "SDI" or "ALL", information such as timecode, menu settings, and error messages is superimposed on the output signals (see page 40). 4 Digital audio signal input/output section DIGITAL 1/2 AUDIO (AES/EBU) INPUT 1/2 OUTPUT 1 DIGITAL AUDIO (AES/EBU) INPUT 1/2 and 3/4 connectors 3/4 3/4 2 DIGITAL AUDIO (AES/EBU) OUTPUT 1/2 and 3/4 connectors These input AES/EBU format digital audio signals. The 1/2 connector corresponds to audio channels 1 and 2, and the 3/4 connector corresponds to audio channels 3 and 4. To handle input signals as non-audio data, use the AUDIO CONTROL >DATA MODE item of the setup menu (see page 102) to set the input of channels 1 and 2 (CH1/CH2 IN) or the input of channels 3 and 4 (CH3/CH4 IN) to "DATA". b DIGITAL AUDIO (AES/EBU) OUTPUT 1/2 and 3/4 connectors (BNC type) These output AES/EBU format digital audio signals. The 1/2 connector corresponds to audio channels 1 and 2, and the 3/4 connector corresponds to audio channels 3 and 4. 5 Timecode input/output section 1 TIME CODE IN connector 2 TIME CODE OUT connector TIME CODE IN OUT a TIME CODE IN connector Inputs SMPTE timecode generated by an external device. b TIME CODE OUT connector Outputs the following timecode, depending on the operating state of the unit. During playback: Playback timecode During recording: The timecode from the internal timecode generator or the timecode input to the TIME CODE IN connector. Note In E-E mode no timecode is output if TIME CODE >EE OUT PHASE in the setup menu is set to "MUTING" (see page 98). 6 Power supply section 1 - AC IN connector 2 POWER switch -AC IN POWER a DIGITAL AUDIO (AES/EBU) INPUT 1/2 and 3/4 connectors (BNC type) 23 Names and Functions of Parts