Stihl MS 251 Instruction Manual - Page 25
Brake Lever on Machines with QuickStop Super, Pull out the flat spring 3. - c replacement chain
View all Stihl MS 251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2310RA035 TG 5.4 Brake Lever on Machines with QuickStop Super 2 2 - Troubleshooting, b 3.2 - Remove the shroud, b 6.4 - Remove the fan housing, b 8.2 - Remove the brake band, b 5.2 1 1 TOP : Pull the hand guard (1) and brake lever (2) off the pivot pins (arrows) together. - Remove the hand guard and brake lever. 2310RA033 TG 1 : Take the brake lever (2) out of the hand guard (1). - Check the anchor pin - if it is worn, install a new engine housing. - Check the cam on the hand guard and replace the hand 1 guard if necessary. TOP 2310RA031 TG - Engage the chain brake. The brake spring is now relaxed. : Use the assembly tool 1117 890 0900 to disconnect the brake spring (1) from the anchor pin (arrow). : Disconnect the brake cable (1). - Remove the brake spring from the brake lever. 2 2310RA034 TG Installing - Clean the pivot pins and disassembled parts, b 14 - Lubricate the pivot pins, b 14 1 1 : Disconnect the spring (1) from the anchor pin (arrow). - Remove the brake spring (1) from the brake lever. 2310RA032 TG 1 3 : Remove the spacer washer (1) and strap (2). : Pull out the flat spring (3). 2310RA018 TG TOP : Push the loop of the flat spring (1) into its seat (arrow) as far as stop. 2310RA020 TG 24 MS 231, MS 231 C, MS 251, MS 251 C