Stihl MS 251 Instruction Manual - Page 88
against the stop arrow., screw 2 firmly.
View all Stihl MS 251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
1 1 2 2310RA343 TG 2310RA345 TG 2310RA348 TG 2 2 1 3 - Coat the grommet with STIHL press fluid to simplify installation, b 14 : Place the air guide shroud (1) in position and pull the grommet of fuel hose (2) into the bore (arrow) until it is properly seated. : Use the ends of the string (2) to pull the manifold flange (1) through the intake opening while pushing the air guide shroud (3) against the manifold flange. - Remove the string. : Position the elbow connector (1) against the stop (arrow). : Insert and tighten down the screw (2) firmly. 2 2 2 1 1 1 2310RA344 TG 2310RA346 TG 2310RA349 TG 2 : Line up grommet (1) of fuel hose (2) so that its straight side (arrow) butts against the edge of the air guide shroud. : Ease the air guide shroud (1) over the stop (arrow) and push it into its seat. : Insert and tighten down the screws (2) firmly. : Starting at the elbow connector (2), push the fuel return hose (1) into the guides (arrows). - Position the fuel return hose snugly - without a loop between the air guide shroud and grommet. Do not kink or pinch the fuel return hose. - Install the carburetor carrier, 2 b 12.8 1 - Install the throttle rod, b 10.3.4 - Install the carburetor, b 12.5 2310RA347 TG : Push the fuel return hose (1) onto the connector (2) as far as stop. MS 231, MS 231 C, MS 251, MS 251 C 87