Stihl MS 251 Instruction Manual - Page 66
Re-installing rewind spring in, frame, refit it in the frame as follows
View all Stihl MS 251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
2310RA229 TG 5902RA608 TG Re-installing rewind spring in frame As the spring seat is deeper on models with ErgoStart, the rewind spring can only fitted directly in the 1 fan housing if it is preassembled in a frame. Make sure that the rewind spring (1) is properly seated and the outer anchor loop is engaged on the lug (arrow). If necessary, push the rewind spring fully into its seat in the fan housing. - Secure the spring so that it cannot pop out. If the rewind spring has popped out, refit it in the frame as follows: 1 - Install the rope rotor, b 8.5 - Reassemble all other parts in the reverse sequence. : Fit the anchor loop in its seat (arrow) in the frame. : Fit the rewind spring (1) counterclockwise in the frame, holding the windings steady in the process. The procedure is otherwise the same as that for installing a new rewind spring on models without ErgoStart. MS 231, MS 231 C, MS 251, MS 251 C 65