TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 110

T1700G-28TQ(config)# no logging monitor 14.8 logging monitor level Description The logging monitor level command is used to limit messages logged to the terminal devices. System logs no higher than the set threshold level will be displayed on the terminal devices. To restore the threshold level to default value, please use no logging monitor level command. Syntax logging monitor level level no logging monitor level Parameter level -- Severity level of the log information output to the terminal devices. There are 8 severity levels marked with values 0-7. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be output to the terminal devices. By default, it is 5 indicating that all the log information between level 0-5 will be output to the terminal devices. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Set the severity level as 7: T1700G-28TQ(config)# logging monitor level 7 14.9 clear logging Description The clear logging command is used to clear the information in the log buffer and log file. Syntax clear logging [ buffer | flash ] 94