TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 263
ipv6 mld snooping querier vlan general, query
View all TP-Link 10GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
Parameter vlan-id -- The VLAN that enables the MLD querier function, ranging from 1 to 4094. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Enable MLD Querier function on VLAN 2: T1700G-28TQ(config)# ipv6 mld snooping querier vlan 2 28.13 ipv6 mld snooping querier vlan (general query) Description The ipv6 mld snooping querier vlan command is used to configure the parameters for MLD Snooping Querier to send a general query frame. To return to the default configuration, please use no ipv6 mld snooping querier vlan command. Syntax ipv6 mld snooping querier vlan vlan-id { query-interval interval | max-response-time response-time | general-query source-ip ip-addr } no ipv6 mld snooping querier vlan vlan-id { query-interval | max-response-time | general-query source-ip } Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. interval -- The time interval to send a general query frame by MLD Snooping Querier, ranging from 10 to 300 (Seconds). By default, it is 60 seconds. response-time -- The maximal time for the host to respond to a general query frame, ranging from 1 to 25 (Seconds). By default, it is 10 Seconds. ip-addr -- The source IP of the general query frame sent by MLD Snooping Querier. It should not be a multicast IP or a broadcast IP. By default, it is fe80::02ff:ffff:fe00:0001. Command Mode Global Configuration Mode 247