TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 301
lldp med-tlv-select
View all TP-Link 10GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 301 highlights
Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the LLDP-MED feature for port 1/0/2: T1700G-28TQ(config)# interface gigabitEthernet 1/0/2 T1700G-28TQ(config-if)# lldp med-status 30.10 lldp med-tlv-select Description The lldp med-tlv-select command is used to configure LLDP-MED TLVs to be included in outgoing LLDPDU for the corresponding port. To exclude LLDP-MED TLVs, please use no lldp med-tlv-select command. By default, All TLVs are included in outgoing LLDPDU. Syntax lldp med-tlv-select { [inventory-management] [location] [network-policy] [power-management] [all] } no lldp med-tlv-select { [inventory-management] [location] [network-policy] [power-management] [all] } Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Exclude "network policy" and "inventory" TLVs in LLDPDU outgoing from port 1/0/2: T1700G-28TQ(config)# interface gigabitEthernet 1/0/2 285