TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 124

Parameter times -- The maximum transfer times of the repeated authentication request, ranging from 1 to 9 in times. By default, the value is 3. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the maximum transfer times of the repeated authentication request as 5: T1700G-28TQ(config)#dot1x max-reauth-req 5 16.8 dot1x Description The dot1x command is used to enable the IEEE 802.1X function for a specified port. To disable the IEEE 802.1X function for a specified port, please use no dot1x command. Syntax dot1x no dot1x Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the IEEE 802.1X function for the Gigabit Ethernet port 1/0/1: T1700G-28TQ(config)#interface gigabitEthernet 1/0/1 108