TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 209

Command Mode Action Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Edit the actions for policy1. Forward the data packets matching ACL 120 in the policy to Gigabit Ethernet port 2: T1700G-28TQ(config)#access-list policy action policy1 120 T1700G-28TQ(config-action)#redirect interface gigabitEthernet 1/0/2 25.15 s-condition Description The s-condition command is used to configure Stream Condition function of policy action. Syntax s-condition rate rate osd { none | discard } Parameter rate -- The rate of Stream Condition, ranging from 0 to 1000000kbps. osd -- Out of Band disposal of Stream Condition. It is the disposal way of the data packets those are transmitted beyond the rate. There are two options, "none" and "discard". By default, the option is "none". Command Mode Action Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Edit the actions for policy1. For the data packets matching ACL 120 in the policy, if the rate beyond 1000kbps, they will be discarded by the switch: T1700G-28TQ(config)#access-list policy action policy1 120 T1700G-28TQ(config-action)#s-condition rate 1000 osd discard 193