TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 37

Chapter 3 Stack The stack technology is to connect multiple stackable devices through their StackWise ports, forming a stack which works as a unified system and presents as a single entity to the network. This chapter describes how to manage the switch stacks. 3.1 switch priority Description The switch priority command is specify the stack member number and the new priority for the stack member. To restore the priority of the specified stack member to the default value as 5, please use no switch priority command. Syntax swtich unitid priority priority no switch unitid priority Parameter unitid -- Specify the member number. priority -- Specify the member's priority, ranging from 1 to 15. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Specify the unit 1's priority as 10 in the stack: T1700G-28TQ(config)# switch 1 priority 10 3.2 switch renumber Description The switch renumber command is modify the member number of a specified stack member. 21