TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 139
system-time dst predefined
View all TP-Link 10GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the system time mode as NTP, the time zone is UTC-12:00, the primary NTP server is 133.100.9.2 and the secondary NTP server is 139.78.100.163, the fetching-rate is 11 hours: T1700G-28TQ(config)# system-time ntp UTC-12:00 133.100.9.2 139.79.100. 163 11 18.3 system-time dst predefined Description The system-time dst predefined command is used to select a daylight saving time configuration from the predefined mode. The configuration can be used recurrently. To disable DST function, please use no system-time dst command. Syntax system-time dst predefined {USA | Australia | Europe | New-Zealand} no system-time dst Parameter USA | Australia | Europe | New-Zealand -- The mode of daylight saving time. There are 4 options which are USA, Australia, Europe and New-Zealand respectively. The default value is Europe. Following are the time ranges of each option: USA: Second Sunday in March, 02:00 ~ First Sunday in November, 02:00. Australia: First Sunday in October, 02:00 ~ First Sunday in April, 03:00. Europe: Last Sunday in March, 01:00 ~ Last Sunday in October, 01:00. New Zealand: Last Sunday in September, 02:00 ~ First Sunday in April, 03:00. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the daylight saving time as USA standard: 123