TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 245

return to the default configuration, please use no ip igmp snooping querier vlan command. Syntax ip igmp snooping querier vlan vlan-id { query-interval interval | max-response-time response-time | general-query source-ip ip-addr } no ip igmp snooping querier vlan vlan-id { query-interval | max-response-time | general-query source-ip } Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. interval -- The time interval to send a general query frame by IGMP Snooping Querier, ranging from 10 to 300 (Seconds). By default, it is 60 seconds. response-time -- The maximal time for the host to respond to a general query frame, ranging from 1 to 25 (Seconds). By default, it is 10 Seconds. ip-addr -- The source IP of the general query frame sent by IGMP Snooping Querier. It should not be a multicast IP or a broadcast IP. By default, it is 192.168.0.1. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example For VLAN 2, specify its query-interval as 200 seconds, and the response-time as 20 seconds: T1700G-28TQ(config)#ip igmp snooping querier vlan 2 query-interval 200 T1700G-28TQ(config)#ip igmp snooping querier vlan 2 max-response-time 20 27.14 ip igmp snooping max-groups Description The ip igmp snooping max-groups command is used to configure the maximum number of groups that a port can join in. The ip igmp snooping max-groups action is used to configure the action that the port takes when it receives an IGMP report message and the maximum number of entries is in the 229