TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 165

Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. User Guidelines Command in the Interface Range gigabitEthernet Mode is executed independently on all ports in the range. It does not affect the execution on the other ports at all if the command results in an error on one port. Example To enter the Interface range gigabitEthernet Configuration Mode, and configure ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one port-list: T1700G-28TQ(config)# interface range gigabitEthernet 1/0/1-3,1/0/6-7,1/0/9 20.3 interface ten-gigabitEthernet Description The interface ten-gigabitEthernet command is used to enter the interface ten-gigabitEthernet Configuration Mode and configure the corresponding Ten Gigabit Ethernet port. Syntax interface ten-gigabitEthernet port Parameter port -- The Ten Gigabit Ethernet port number. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example To enter the Interface gigabitEthernet Configuration Mode and configure Ten-Gigabit Ethernet port 1/0/25: 149