TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 285

29.13 rmon history Description The rmon history command is used to configure the history sample entry. To return to the default configuration, please use no rmon history command. RMON (Remote Monitoring), basing on SNMP architecture, functions to monitor the network. History Group is one of the commonly used RMON Groups. After a history group is configured, the switch collects network statistics information periodically, based on which the management station can monitor network effectively. Syntax rmon history index interface { gigabitEthernet port | ten-gigabitEthernet port } [ interval seconds ] [ owner owner-name ] [ buckets number ] no rmon history index Parameter index -- The index number of the entry, ranging from 1 to 12, in the format of 1-3,5. port --The Ethernet port number. seconds -- The interval to take samplings from the port, ranging from 10 to 3600 in seconds. By default, it is 1800. owner-name -- The owner of the history sample entry, ranging from 1 to 16 characters. By default, it is "monitor". number -- The maximum number of buckets desired for the RMON history group of statistics, ranging from 1 to 130. The default is 50 buckets. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the sample port as Gi1/0/2 and the sample interval as 100 seconds for the entry 1-3: T1700G-28TQ(config)# rmon history 1-3 interface gigabitEthernet 1/0/2 interval 100 owner owner1 269