TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 134

Parameter all -- Displays the security information of all the Ethernet ports. port -- The Ethernet port number. Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement None. Example Display the security configuration of all ports: T1700G-28TQ(config)# show mac address-table max-mac-count Display the security configuration of port 1/0/1: T1700G-28TQ(config)# show mac address-table max-mac-count interface gigabitEthernet 1/0/1 17.8 show mac address-table interface Description The show mac address-table interface command is used to display the address configuration of the specified port/LAG. Syntax show mac address-table interface { gigabitEthernet port | ten-gigabitEthernet port | port-channel lagid } Parameter port -- The Ethernet port number. lagid -- The ID of the LAG. Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement None. Example Display the address configuration of port 1/0/1: T1700G-28TQ(config)# show mac address-table interface gigabitEthernet 1/0/1 118