TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 208

25.13 access-list policy action Description The access-list policy action command is used to add ACLs and create actions for the policy. To set the detailed configuration of actions for a policy, please use access-list policy action command to access Action Configuration Mode. To delete the corresponding actions, please use no access-list policy action command. Syntax access-list policy action policy-name acl-id no access-list policy action policy-name acl-id Parameter policy-name -- The Policy Name, ranging from 1 to 16 characters. acl-id -- The ID of the ACL to which the above policy is applied. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Add ACL whose ID is 120 to policy1 and create an action for them: T1700G-28TQ(config)# access-list policy action policy1 120 25.14 redirect interface Description The redirect interface command is used to configure Direction function of policy action for specified ports. Syntax redirect interface { gigabitEthernet port | ten-gigabitEthernet port } Parameter port -- The Destination Port of Redirect. The data packets matching the corresponding ACL will be forwarded to the specific port. By default, it is All Ports. 192