TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 162

Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the automatic ipv6 address configuration function to obtain IPv6 address through the RA message on VLAN interface 1: T1700G-28TQ(config)# interface vlan 1 T1700G-28TQ(config-if)# ipv6 address ra 19.6 ipv6 address eui-64 Description This command is used to manually configure a global IPv6 address with an extended unique identifier (EUI) in the low-order 64 bits on the interface. Specify only the network prefix. The last 64 bits are automatically computed from the switch MAC address. To remove an EUI-64 IPv6 address from the interface, please use the no ipv6 address eui-64 command. Syntax ipv6 address ipv6-addr eui-64 no ipv6 address ipv6-addr eui-64 Parameter ipv6-addr -- Global IPv6 address with 64 bits network prefix, for example 3ffe::/64. Configuration Mode Interface Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure an EUI-64 global address on the interface with the network prefix 3ffe::/64: T1700G-28TQ(config)# interface vlan 1 T1700G-28TQ(config-if)# ipv6 address 3ffe::/64 eui-64 146