TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 69

the the settings of different functions without the right to edit or modify. It is "admin" by default. 0 -- Specify the encryption type. 0 indicates that an unencrypted password will follow. By default, the encryption type is 0. password --Users' login password, a string from 1 to 31 alphanumeric characters or symbols. The password is case sensitive, allows digits, English letters (case sensitive), underlines and sixteen special characters The password will be saved to the configuration file using the MD5 encrypted algorithm. 5 -- Indicates an MD5 encrypted password with fixed length will follow. encrypted-password -- An MD5 encrypted password with fixed length, which you can copy from another switch's configuration file. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. User Guidelines If both the user name (password) and user name (secret) are defined, only the latest configured password will take effect. Example Add and enable a new admin user named "tplink", of which the password is "admin". The password will be displayed in the encrypted form. T1700G-28TQ(config)#user name tplink privilege admin secret 0 admin 9.3 user access-control ip-based Description The user access-control ip-based command is used to limit the IP-range of the users' access. Only the users within the IP-range you set here are allowed to access the switch. To cancel the user access limit, please use no user access-control command. Syntax user access-control ip-based { ip-addr ip-mask } [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] 53