TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 40

Privilege Requirement Only Admin level users have access to these commands. Example Create a provisioned switch whose stack member number is 2 and device type is T1700G-28TQRev1: T1700G-28TQ(config)# switch 2 provision T1700G-28TQRev1 3.5 show switch Description The show switch command is used to display the current stack's information. Syntax show switch [ unitid | detail | neighbors | stack-ports ] Parameter unitid -- Specify the member number. detail -- Display the detailed information of the stack, including stack member, stack port and neighboring information. neighbors -- Display the information of the stack neighbor. stack-ports -- Display the information of the stack ports. Command Mode Privileged EXEC Mode and any Configuration Mode Privilege Requirement None. Example Display the detailed information of the current stack: T1700G-28TQ(config)# show switch detail 24