TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 339

Privilege Requirement Only Admin level users have access to these commands. Example Configure the login authentication method list on the HTTP access as "list1": T1700G-28TQ(config)# ip http login authentication list1 34.22 ip http enable authentication Description The ip http enable authentication command is used to apply the privilege authentication method list to users accessing through HTTP. To restore to the default authentication method list, please use the no ip http enable authentication command. Syntax ip http enable authentication { method-list } no ip http enable authentication Parameter method-list -- Specify the enable method list on the HTTP access. It is "default" by default, which contains the method "none". Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the enable authentication method list on the HTTP access as "list2": T1700G-28TQ(config)# ip http enable authentication list2 34.23 show aaa global Description This show aaa global command is used to display global status of AAA function and the login/enable method lists of different application modules: telnet, ssh and HTTP. 323