TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 337

Example Configure the login authentication method list on the ssh terminal line as "list1": T1700G-28TQ(config)# line ssh T1700G-28TQ(config-line)# login authentication list1 34.19 enable authentication(telnet) Description The enable authentication command is used to apply the privilege authentication method list to the telnet terminal line. To restore to the default authentication method list, please use the no enable authentication command. Syntax enable authentication { method-list } no enable authentication Parameter method-list -- Specify the enable method list on the telnet terminal line. It is "default" by default, which contains the method "none". Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the enable authentication method list on the telnet terminal line as "list2": T1700G-28TQ(config)#line telnet T1700G-28TQ(config-line)# enable authentication list2 34.20 enable authentication(ssh) Description The enable authentication command is used to apply the privilege authentication method list to the ssh terminal line. To restore to the default authentication method list, please use the no enable authentication command. 321