TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 258
ipv6 mld snooping immediate-leave, 7 ipv6 mld snooping drop-unknown
View all TP-Link 10GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
28.6 ipv6 mld snooping immediate-leave Description The ipv6 mld snooping immediate-leave command is used to configure the Fast Leave function for port. To disable the Fast Leave function, please use no ipv6 mld snooping immediate-leave command. Syntax ipv6 mld snooping immediate-leave no ipv6 mld snooping immediate-leave Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Privilege Requirement Only Admin and Operator level users have access to these commands. Example Enable the Fast Leave function for port 1/0/3: T1700G-28TQ(config)# interface gigabitEthernet 1/0/3 T1700G-28TQ(config-if)# ipv6 mld snooping immediate-leave 28.7 ipv6 mld snooping drop-unknown Description The ipv6 mld snooping drop-unknown command is used to enable the unknown multicast packets filter function. To disable this function, please use no ipv6 mld snooping drop-unknown command. By default, it is disabled. Syntax ipv6 mld snooping drop-unknown no ipv6 mld snooping drop-unknown Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Enable unknown multicast filter function: T1700G-28TQ(config)# ipv6 mld snooping drop-unknown 242