TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 187

Chapter 22 Port Mirror Commands Port Mirror refers to the process of forwarding copies of packets from one port to a monitoring port. Usually, the monitoring port is connected to data diagnose device, which is used to analyze the monitored packets for monitoring and troubleshooting the network. 22.1 monitor session destination interface Description The monitor session destination interface command is used to configure the monitoring port. Each monitor session has only one monitoring port. To change the monitoring port, please use the monitor session destination interface command by changing the port value. The no monitor session command is used to delete the corresponding monitoring port or monitor session. Syntax monitor session session_num destination interface { gigabitEthernet port | ten-gigabitEthernet port } no monitor session session_num destination interface { gigabitEthernet port | ten-gigabitEthernet port } no monitor session session_num Parameter session_num -- The monitor session number, can only be specified as 1. port -- The monitoring port number. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Create monitor session 1 and configure port 1/0/1 as the monitoring port: T1700G-28TQ(config)# monitor session 1 destination interface gigabitEthernet 1/0/1 Delete the monitoring port 1/0/2 from monitor session 1： 171