TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 314

distance -- The distance metric of this route, ranging from 1 to 255. The smaller the distance is, the higher the priority is. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Create a static route with the destination IP address as 192.168.2.0, the subnet mask as 255.255.255.0 and the next-hop address as 192.168.0.2: T1700G-28TQ(config)# ip route 192.168.2.0 255.255.255.0 192.168.0.2 32.8 description Description This description command is used to add a description to the Layer 3 interface, including routed port, port-channel interface, loopback interface and VLAN interface. To clear the description of the corresponding interface, please use the no description command. Syntax description string no description Parameter string -- Content of an interface description, ranging from 1 to 32 characters. Command Mode Interface Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Add a description system-if to the routed port 1/0/9 : T1700G-28TQ(config)# interface gigabitEthernet 1/0/9 T1700G-28TQ(config-if)# no switchport 298