TP-Link 10GE T1700G-28TQUN V1 CLI Reference Guide - Page 195
loopback-detection recover
View all TP-Link 10GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
recovery-mode -- The mode how the blocked port recovers to normal status. Auto: Block status can be automatically removed after recovery time. Manual: Block status can only be removed manually. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the loopback detection process-mode as port-based and recovery-mode as manual for port 2: T1700G-28TQ(config)# interface gigabitEthernet 1/0/2 T1700G-28TQ(config-if)# loopback-detection config process-mode port-based recovery-mode manual 24.6 loopback-detection recover Description The loopback-detection recover command is used to remove the block status of selected ports, recovering the blocked ports to normal status, Syntax loopback-detection recover Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet / interface ten-gigabitEthernet / interface range ten-gigabitEthernet) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Recover the blocked port 2 to normal status: T1700G-28TQ(config)# interface gigabitEthernet 1/0/2 179