TP-Link Archer MR200 Archer MR200 V1 User Guide - Page 67
column, Enter Site B's, of Site B.
View all TP-Link Archer MR200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 11 Specify Your Network Settings 3 ) In the IPSec Connection Name column, specify a name. 4 ) In the Remote IPSec Gateway (URL) column, Enter Site B's WAN IP address. 5 ) To configure Site A's LAN: In the Tunnel access from local IP addresses column, here we take Subnet Address as an example. Then input the LAN IP range of Site A in the IP Address for VPN column, and input Subnet Mask of Site A. 6 ) To configure Site B's LAN: In the Tunnel access from local IP addresses column, here we take Subnet Address as an example. Then input the LAN IP range of Site B in the IP Address for VPN column, and input Subnet Mask of Site B. 7 ) Select the Key Exchange Method for the policy. We select Auto(IKE) here. 63
63
Chapter 11
Specify Your Network Settings
3 ) In the
IPSec Connection Name
column, specify a name.
4 ) In the
Remote IPSec Gateway (URL)
column, Enter Site B’s
WAN IP address.
5 ) To configure
Site A’s LAN
:
In the
Tunnel access from local IP addresses
column, here we
take
Subnet Address
as an example. Then input the LAN IP
range of Site A in the
IP Address for VPN
column, and input
Subnet Mask
of Site A.
6 ) To configure
Site B’s LAN
:
In the
Tunnel access from local IP addresses
column, here we
take
Subnet Address
as an example. Then input the LAN IP
range of Site B in the
IP Address for VPN
column, and input
Subnet Mask
of Site B.
7 ) Select the
Key Exchange Method
for the policy. We select
Auto(IKE)
here.