TP-Link Archer MR200 Archer MR200 V1 User Guide - Page 86
T4. What can I do if I cannot access the Internet?, Open a web browser and enter
View all TP-Link Archer MR200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
• Use another web browser or computer and log in again. • Reset the router to factory default settings: With the router powered on, press and hold the WPS/RESET button on the rear panel of the router until the Power LED starts flashing. Note: You'll need to reconfigure the router to surf the Internet once the router is reset. Open a web browser and log in again. If login fails, please contact the technical support. T4. What can I do if I cannot access the Internet? 1. Verify that your SIM card is an LTE, WCDMA or GSM card. 2. Verify that your SIM card is in your ISP's service area. 3. Verify that your SIM card has sufficient credit. 4. Check the LAN connection: Open a web browser and enter http://tplinkmodem.net or http://192.168.1.1 in the address bar. If the login page does not appear, refer to T3 and then try again. 5. Check your ISP parameters: 1 ) Open a web browser and log in to the web management page. 82