Toshiba Qosmio G30 PQG32C-AV605E Users Manual Canada; English - Page 144

HW Setup Network Boot Protocol This feature sets the protocol to remotely boot from the network. Network Boot Protocol is not displayed for Gigabit Ethernet LAN. [PXE] Sets PXE as the protocol (Default). [RPL] Sets RPL as the protocol. Keyboard Wake-up on Keyboard When this feature is enabled, and the computer is in Standby Mode, you can turn on the system by pressing any key. However, please be aware that this option will only work with the internal keyboard and only when the computer is in Standby Mode. Enabled Enables the Wake-up on Keyboard function. Disabled Disables the Wake-up on Keyboard function (Default). CPU This function allows you to set the processor's operating mode. Please note that this option is displayed only on models with an Intel® Core™ Duo processor and an Intel® Core™ 2 Duo processor. Dynamic CPU Frequency Mode This option allows you to configure the power saving modes associated with the processor - the following settings are available: Dynamically Switchable The processor's power consumption and automatic clock speed switching functions are enabled - in use the processor's operation is automatically switched when necessary (default). Always High The processor's power consumption and automatic clock speed switching functions are disabled - in use the processor will always run at its highest level of power consumption and its highest speed. Always Low The processor's power consumption and automatic clock speed switching functions are disabled - in use the processor will always run at a lower level of power consumption and a low speed. 7-6 User's Manual