Toshiba Qosmio G30 PQG32C-AV605E Users Manual Canada; English - Page 197

Optional Devices Align the grooves along the edges of the memory module with the locking tabs on the connector and insert the module into the connector firmly - if you find it difficult to install the memory module, gently prise the locking tabs outwards using the tip of your finger. Please also ensure that you hold the memory module along its left and right hand edges - the edges with the grooves in. ■ Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury. ■ Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 7. Seat the memory module cover in place and secure it with one screw. Take care to ensure that the memory module cover is firmly closed. Memory module cover Screw Seating the memory module cover 8. Install the battery pack - refer to Replacing the battery pack section in Chapter 6, Power, if required. 9. Turn your computer over. 10. Switch the computer on and make sure the added memory is recognized - this can be confirmed by clicking start followed by Control Panel followed by Performance and Maintenance and then selecting the System icon. 11. Open the System Properties window and then click the General tab. Removing a memory module To remove the memory module, follow the steps as detailed below: 1. Set the computer to Boot Mode and turn its power off - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 3, Getting Started, if required). 2. Remove the AC adaptor and all cables and peripherals connected to the computer. User's Manual 9-15