Toshiba Tecra M4-S635 User Guide - Page 113

113 Learning the Basics Powering down the computer 5 Select Shut down for the option you want. ❖ When I press the power button Set this option to Shut down if you want the computer to turn off when you slide the power switch. 6 Click Apply. 7 Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again after Turn Off or Shut down To start the computer up again, slide and release the power switch; the on/off light changes to green. Using hibernation mode Hibernation is a default setting. If it should become disabled, you can enable it as follows: 1 Right-click the mouse on the Toshiba Power Saver icon located in the System Task Tray. 2 Click Hibernate. 3 Click Enable. Going into hibernation mode If you are not connected to a Windows® network server (domain server), power off the computer using the Hibernation command as follows: 1 Click Start, Turn off computer. The Turn off computer window appears. 2 Hold down the shift key and click Hibernate ("Hibernate" only appears while the Shift key is held down).