Xerox 6250N Service Manual - Page 131

Tray and Media Errors Insert Tray [2] or Tray [2] Missing ■ Remove Tray 2 and inspect the tray cavity of the printer to ensure that it is free of obstructions or debris. ■ Reinstall the tray. ■ Cycle printer power. ■ If the problem persists, follow the procedure below. Troubleshooting Reference Table Applicable Parts Paper Size Switch Assembly, PL 3.2.4 Wiring and Plug/Jack Map References "Paper Tray 2" on page 10-17 Troubleshooting Procedure Table Steps 1 2 3 4 Actions and Questions Yes No Check the following for evidence of fault or damage: Paper Size Switch Tray [2], PL 3.2.4 Actuators on the right side of Tray [2] Use service diagnostics to test the Tray [2] Paper Size Switches. Use the table below for reference. Do the switches function correctly? Verify the pertinent voltages on pins P/J47 - 1 P/J47 - 3 P/J47 - 2 P/J47 - 3 P/J47 - 4 P/J47 - 3 Correspond to the paper size switch position chart below. Verify the pertinent voltages on pins P/J42 - 16 P/J42-15 P/J42-17 P/J42-15 P/J42-18 P/J42-15 Correspond to the paper size switch position chart below. Replace the Go to Step 2. parts concerned. Replace Engine Control Board, page 8-107. Go to Step 3. Go to Step 4 Replace the Paper Size Switch page 8-26. Replace Engine Control Board, page 8-107 Replace the Motor Driver Board page 8-101. 3-50 Phaser 6250 Color Laser Printer Service Manual